SmartBridges sB3415-03, sB3415-02, sB3415-01 manual Changing from Router to NAT Mode

i n t e l l i g e n t w i r e l e s s p l a t f o r m

2.6. Changing from Router to NAT Mode

Follow the steps below to change the airClient TOTAL from Router Mode to NAT Mode:

1.From the navigation menu bar, click on Tools System Configuration. The System Configuration screen will appear as shown below.

2.Under the Current Operational Mode, choose the operation mode NAT.

3.Click on Save to reboot the unit and convert to NAT mode.

4.The IP Address, IP Mask and Gateway for Ethernet Configuration and Wireless Configuration remains the same in the NAT mode as it was in the Router mode.

Figure 2-8 Changing Router Mode to NAT Mode

2.7. Changing from Router/NAT to Bridge Mode (sB3415-03 Only)

This section is only valid for the sB3415-03 model. Follow the steps below to change the airClient TOTAL from the Router or NAT mode to Bridge mode:

1.From the navigation menu bar, click on Tools System Configuration. The System Configuration screen will appear as shown below.

2.Under the Current Operational Mode settings, choose Bridge option. (Note: IP Mux Enable/Disable options can be left as default for now. More on this will be covered in Bridge Mode Configuration, covered in Section 2-9).

airClient™ TOTAL 3415 User Guide Page 22 of 75