i n t e l l i g e n t w i r e l e s s

p l a t f o r m

2.10. airClient TOTAL Router / NAT Configuration

This section covers the procedures for configuring various parameters in the Router and NAT modes.

2.10.1.LAN Settings

The LAN and the WLAN settings are maintained in two different subnets.

Follow the steps below to re-configure the airClient TOTAL Router/NAT Ethernet parameters:

1.From the navigation menu bar, click on Home LAN Settings to change Ethernet/wired side parameters. The LAN Settings screen will appear as shown below.

2.Enter the System Name of the unit, if required.

3.Enter the IP address and Subnet mask to set the LAN IP address and subnet mask.

4.Click on Save to apply the settings.

Figure 2-21 airClient TOTAL Router/NAT LAN Settings

airClient™ TOTAL 3415 User Guide

Page 36 of 75

 

Page 36
Image 36
SmartBridges sB3415-02, sB3415-03 manual AirClient Total Router / NAT Configuration, airClient Total Router/NAT LAN Settings