Panasonic DMCFZ7K Attaching the Lens Hood, Attach the hood adaptor supplied, Strap supplied

Preparation

∫Strap (supplied)

1 Pass the strap through the hole at the strap eyelet.

2 Pass the strap through the stopper and fasten the strap.

A: Pull the strap 2 cm or more.

•Attach the strap to the other side of the camera being careful not to twist it.

•Check that the strap is firmly attached to the camera.

•Attach the strap so that you can see the “LUMIX” logo.

Attaching the Lens Hood

In bright sunlight or backlight, the lens hood will minimize lens flare and ghosting. The lens hood cuts off excess lighting and improves the picture quality.

•Check that the camera is turned off and that the lens is retracted.

•Close the flash.

1 Attach the hood adaptor (supplied).

•Do not tighten the hood adaptor too much.

2 Place the camera upside down, align the mark on the lens hood with the mark A on the camera and then insert the lens hood.

3 Tighten the screw.

•Check if the screw is loose and then attach the lens hood.

•Do not tighten the screw too much.

17

VQT0V63