Preparation

Removing the hood adaptor

Hold the edge of the hood adaptor to remove it.

Temporarily storing the lens hood

1 Loosen the screw and remove the lens hood.

2 Reverse the lens hood.

18

3 Attach the lens hood with the screw facing upwards and then tighten the screw again.

Make sure the screw is loose and then attach the lens hood.

Do not tighten the screw too much.

4 Attach the lens cap.

Ensure that the lens cap is firmly attached.

Do not take a picture while the lens hood is temporarily stored.

When taking pictures with flash with the lens hood attached, the lower portion of the photo may turn dark (vignetting effect) and the control of the flash may be disabled because the photo flash may be obscured by the lens hood. We recommend detaching the lens hood.

When using the AF assist lamp in the dark, detach the lens hood.

For details on how to attach the MC protector and the ND filter, refer to P105.

You cannot attach the conversion lenses or filters and the close-up lens when the hood adaptor is attached.

VQT0V63

Page 18
Image 18
Panasonic DMC-FZ7, DMCFZ7S, DMCFZ7K Removing the hood adaptor, Hold the edge of the hood adaptor to remove it