Detaching a lens from the camera body
Attach the lens cap.
Press the lens release button D while turning the lens as far as possible in the direction of the arrow to detach it.
• Always attach the body cap to the camera body so that dirt or dust does not get inside.
• Attach the lens rear cap so that the lens contact point does not get scratched.
Note
•It is recommended to attach the lens cap or attach the MC Protector (optional) to protect the lens surface when carrying.
Attaching the Lens Hood
In bright sunlight or backlight, the lens hood will minimize lens flare and ghosting. The lens hood cuts off excess lighting and improves the picture quality.
To attach the lens hood (flower shape) that came with the interchangeable lens
•The interchangeable lens
Insert the lens hood into the lens with the short sides at the top and bottom, and turn in the direction of the arrow until it stops.
A Align with the mark.
Note
•When temporarily detaching and carrying the lens hood, attach the lens
hood to the lens in the reverse direction.
(ENG) VQT3E96 15
