VQT3E96 (ENG)
30
Playing Back Motion Pictures•This unit was designed to play motion pictures using the AVCHD and QuickTime Motion JPEG
formats that were taken with this model (only).
•Motion pictures in AVCHD format that can be played back on this unit are [AVCHD] motion
pictures that were recorded with this unit, AVCHD format (including [AVCHD Lite]) motion
pictures recorded with Panasonic digital cameras (LUMIX) only.
Press [(].
∫Operations performed during Motion Picture Playback
1Display control panel by touching screen.
•If no operation is performed for 2seconds, it will return to original status.
2Operate control panel by touching.
•About fast forward/rewind playback
–Touch [ ] during playback to fast forward (touch [ ] to fast rewind). The fast forward/
rewind speed increases if you touch [ ]/[ ] again. (The display on the screen changes
from [5] to [ ].)
–Touch [ ] to resume normal playback speed.
–When using a high capacity card, it is possible that fast rewinding may be slower th an usual.
Select a picture with a Motion Picture icon ([ ],
[ ]) and then touch [ ] to play back.
AMotion picture icon
BThe motion picture recording time
•After playback starts, the elapsed playback t ime is displa yed on
the upper left of the screen.
For example, 8 minutes and 30 seconds is displayed as
[8m30s].
•Some information (recording information, etc.) is not displayed for moti on pictures
recorded in [AVCHD].
•Pressing the cursor but ton 3 to allows you to playback motion pictures. Display at the
upper right of the screen while playing back corresponds to 3/4/2/1 on the cursor
button.
CFast rewind, Frame-by-frame rewind¢2
DPlay/Pause
EFast forward, Frame-by-frame forward¢2
FStop
GReduce volume level¢1
HIncrease volume level¢1
¢1 You can also adjust the volume level by using
the rear dial.
¢2 These operations can be performed only in the
Pause Mode and the following icons are
displayed.
–Frame-by-frame forward: [ ]
–Frame-by-frame rewind: [ ]
BA
DMC-GF2PP-VQT3E96_eng.book 30 ページ ２０１０年１１月１８日 木曜日 午前９時５２分