Charging the Battery
∫About batteries that you can use with this unit
The battery that can be used with this unit is DMW-BLE9PP.
It has been found that counterfeit battery packs which look very similar to the genuine product are made available to purchase in some markets. Some of these battery packs are not adequately protected with internal protection to meet the requirements of appropriate safety standards. There is a possibility that these battery packs may lead to fire or explosion. Please be advised that we are not liable for any accident or failure occurring as a result of use of a counterfeit battery pack. To ensure that safe products are used we would recommend that a genuine Panasonic battery pack is used.
•Use the dedicated charger and battery.
Charging
•The battery is not charged when the camera is shipped. Charge the battery before use.
•Charge the battery with the charger indoors.
Attach the battery paying attention to the direction of the battery.
Connect the charger to the |
|
electrical outlet. | [CHARGE] |
• Disconnect the charger from the electrical socket and detach the battery after charging is completed.
∫About the [CHARGE] indicator
On: It will light up while charging.
Off: It will turn off when it completes the charging normally.
•When the [CHARGE] indicator flashes
–The battery temperature is too high or too low. It is recommended to charge the battery again in an ambient temperature of between 10 oC and 30 oC (50 oF and 86 oF).
–The terminals of the charger or the battery are dirty. In this case, wipe them with a dry cloth.
(ENG) VQT3Q61 17
