Panasonic DMC-GH1K operating instructions Others

Others

>Motion pictures recorded in [AVCHD] can be played back on Panasonic televisions (VIERA) with the AVCHD logo.

The picture is not displayed fully on the TV.

>Check [TV ASPECT] setting. (P36)

VIERA Link does not work.

•Is it connected properly with the HDMI mini cable (optional)? (P147)

>Confirm that the HDMI mini-cable (optional) is firmly fitted.

>Press [(] on this unit.

•Is the [VIERA Link] on this unit set to [ON]? (P37)

>Depending on HDMI terminal of the TV, the input channel may not switch automatically. In this case, use the remote control for the TV to switch input. (For details on how to switch input, please read the operating instructions for the TV.)

>Check the VIERA Link setting on the connected device.

>Turn the power to the unit off and then back on again.

>Set [VIERA Link] to [Off] on the TV and then turn it back to [On]. (Refer to the operating instructions of the TV for details.)

The picture cannot be transferred when the camera is connected to a PC.

•Is the camera connected to the PC correctly?

•Is the camera recognized by the PC correctly?

>Set to [PC] in [USB MODE]. (P36, 153)

The card is not recognized by the PC.

>Disconnect the USB connection cable. Connect it again while the card is inserted in the camera.

The picture cannot be printed when the camera is connected to a printer.

•Pictures cannot be printed using a printer which does not support PictBridge.

>Set to [PictBridge(PTP)] in [USB MODE]. (P36, 155)

The ends of the pictures are cut at printing.

>When using a printer with a trimming or borderless printing function, cancel this function before printing. (For details, refer to the operating instructions for the printer.)

>When you order photo studios to print pictures, ask the photo studio if the pictures can be printed with both ends.

Others

There is a sound from lens unit.

•It is a sound of lens movement or aperture operation when the power is turned [ON] or [OFF], and it is not a malfunction.

•You may hear a sound from the lens and image in the LCD monitor may suddenly change when the brightness has changed by zoom operation or moving the camera, but there is no effect on recording.

The sound is caused by the automatic adjustment of the aperture. This is not a malfunction.

VQT2A61 179