Panasonic DMC-GH1 Press 3/ 4 to select PC, and then press MENU/SET, Double-click Dcim folder

Connecting to other equipment

Acquiring of still pictures and [MOTION JPEG] motion pictures

(other than [AVCHD] motion pictures)

Preparations: Turn the LCD monitor so the LCD will show out.

Turn on the camera and the PC.

AUSB connection cable (supplied)

•Check the directions of the connectors, and plug them straight in or unplug them straight out.

(Otherwise the connectors may be bent out of shape which will cause trouble.)

BAlign the marks, and insert. C AC adaptor (supplied)

• Use a battery with sufficient battery power or the AC adaptor (P25). If the remaining battery power becomes low while the camera and the PC are communicating, the status indicator blinks and the alarm beeps.

Refer to “Disconnecting the USB connection cable safely” (P154) before disconnecting the USB connection cable. Otherwise, data may be destroyed.

Connect the camera to a PC via the USB connection cable A (supplied).

•Do not use any other USB connection cables except the supplied one. Use of cables other than the supplied USB connection cable may cause malfunction.

Press 3/4 to select [PC], and then press [MENU/SET].		USB MODE
		PLEASE SELECT
• If [USB MODE] (P36) is set to [PC] in the [SETUP] menu in		THE USB MODE
advance, the camera will be automatically connected to the PC		PC
		PictBridge(PTP)
without displaying the [USB MODE] selection screen. Since
	SELECT		SET	MENU
there is no need to set this each time you connect to the PC, it

is convenient.

•When the camera has been connected to the PC with [USB MODE] set to [PictBridge(PTP)], a message may appear on the PC’s screen. Select [Cancel] to close the screen, and disconnect the camera from the PC. Then set [USB MODE] to [PC] again.

Double-click on [Removable Disk] in [My Computer].

•When using a Macintosh, the drive is displayed on the desktop. (“LUMIX”, “NO_NAME” or “Untitled” is displayed.)

Double-click [DCIM] folder.

VQT2A61 153