Preparation

Inserting/Removing the Card (Optional)

Check that this unit is turned off.

Close the flash.

We recommend using a Panasonic card.

Slide the card door to open it.

Push it fully until it clicks being careful about the direction you insert it. To remove the card, push the card until it clicks, then pull the card out upright.

A: Do not touch the connection terminals of the card.

The card may be damaged if it is not fully inserted.

1: Close the card door.

2: Slide the card door to the end and then close it firmly.

If the card door cannot be completely closed, remove the card, check its direction and then insert it again.

Note

Always turn the camera off before opening the card door.

Before removing the card, turn the camera off, and wait until the status indicator has gone off completely. (Otherwise, this unit may no longer operate normally and the card itself may be damaged or the recorded pictures may be lost.)

26 VQT2A61

Page 26
Image 26
Panasonic DMC-GH1K Inserting/Removing the Card Optional, Do not touch the connection terminals of the card