Message displays
[Insert SD card again] [Try another card]
●Access to card has failed.
→ Turn off the camera and remove the card. Reinsert the card and turn the camera on again.
●Try with a different card.
[Memory card parameter error]
●Card is not of SD standard.
●When cards in capacities of 4 GB or more are used, only SDHC or SDXC Memory Cards are supported.
[Read Error] / [Write Error] [Please check the card]
●Data read has failed.
→Check whether card has been inserted correctly. (→19)
●Data write has failed.
→Turn off the camera and remove the card. Reinsert the card and turn the camera on again.
●Card may possibly be damaged.
●Try with a different card.
[Motion recording was cancelled due to the limitation of the writing speed of the card]
●If recording stops even when using a card of the recommended speed class (→21), the data writing speed has dropped. If this happens, we recommend backing up the data on the memory card and formatting it (→49).
●Motion picture recording may be automatically terminated with certain cards.
[A folder cannot be created]
●Folder numbers in use have reached 999.
→ Save needed data on a computer or other device, and then use [Format] on the camera. (→49)
[Picture is displayed for 16:9 TV] [Picture is displayed for 4:3 TV]
●AV cable (supplied) is connected to camera.
→To remove message immediately → Press [MENU/SET].
→To change aspect ratio → Change [TV Aspect] (→48).
●USB connection cable (supplied) is only connected to camera.
→Message disappears when cable is also connected to another device.
- 106 - | VQT4K59 |
