Panasonic DMC-TS25 152, Cannot communicate with the PC, Ends of the pictures are cut at printing

Others

Cannot communicate with the PC.

•Is the camera connected to the PC correctly?

•Is the camera recognized by the PC correctly?

>Select [PC] when connecting. (P124)

>Turn this unit off and on.

The card is not recognized by the PC. (The built-in memory is recognized.)

>Disconnect the USB connection cable. Connect it again while the card is inserted in the camera.

>If there are two or more USB terminal on a single PC, try connecting the USB connection cable to another USB terminal.

The card is not recognized by the PC. (SDXC memory card is used)

>Check if your PC is compatible with SDXC memory cards. http://panasonic.net/avc/sdcard/information/SDXC.html

>A message prompting to format the card may be displayed when connecting, but do not format.

>If the [Access] displayed on the LCD monitor does not disappear, disconnect the USB connection cable after turning this unit off.

The picture cannot be printed when the camera is connected to a printer.

•Pictures cannot be printed using a printer that does not support PictBridge.

>Select [PictBridge(PTP)] when connecting. (P127)

The ends of the pictures are cut at printing.

>When using a printer with a Cropping or borderless printing function, cancel this function before printing. (For details, refer to the operating instructions for the printer.)

>When you order photo studios to print pictures, ask the photo studio if the 16:9 pictures can be printed.

The panorama picture is not printing correctly.

•Since aspect ratio of a panorama picture differs from normal pictures, it may not always be possible to print it correctly.

>Please use a printer that supports panorama pictures. (For details, please see the operating instructions of your printer)

>We recommend using the “PHOTOfunSTUDIO” software on the CD-ROM (supplied) to adjust the size of the still picture to the print paper size.

- 152 -