Panasonic DMC-TS25 Set the language displayed on the screen, ~ Language, Stabilizer Demo

Basic

[Format]

The built-in memory or card is formatted. Formatting irretrievably deletes all the data so check the data carefully before formatting.

•Use a battery with sufficient battery power or the AC adaptor (optional) when formatting. Do not turn the camera off during formatting.

•If a card has been inserted, only the card is formatted. To format the built-in memory, remove the card.

•If the card has been formatted on a PC or other equipment, format it on the camera again.

•It may take longer to format the built-in memory than the card.

•If you cannot format, contact the dealer or Panasonic.

For USA and Puerto Rico assistance, please call:

1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.com/contactinfo

For Canadian assistance, please call:

1-800-99-LUMIX (1-800-995-8649) or

send e-mail to: lumixconcierge@ca.panasonic.com

~[Language]

Set the language displayed on the screen.

•If you set a different language by mistake, select [~] from the menu icons to set the desired language.

[Stabilizer Demo.]

Displays the amount of jitter the camera has detected.

AAmount of jitter

BAmount of jitter after correction

A B

•The Stabilizer function is switched between [On] and [Off] every time [MENU/SET] is pressed.

•[Stabilizer Demo.] is an approximation.

- 50 -