Panasonic DMC-TS25 owner manual Printing the Pictures, 127

Connecting to other equipment

Printing the Pictures

If you connect the camera to a printer supporting PictBridge, you can select the pictures to be printed out and instruct that printing be started on the camera’s LCD monitor.

•Some printers can print directly from the card removed from the camera. For details, refer to the operating instructions of your printer.

Preparations:

Turn on the camera and the printer.

Remove the card before printing the pictures from the built-in memory.

Check print quality and other settings on the printer before printing the pictures.

Connect the printer and camera with the USB connection cable (supplied).

•Check the directions of the connectors, and plug them straight in or unplug them straight out. (Otherwise the connectors may be bent out of shape which will cause a malfunction.)

•Do not use any other USB connection cables except the supplied one or a genuine Panasonic USB connection cable (DMW-USBC1: optional).

		ャ モヷ ヰ
A USB connection cable (supplied)	B Align the marks, and insert.

Press 3/4 to select [PictBridge(PTP)], and then press [MENU/SET].

•Use a battery with sufficient battery power or the AC adaptor (optional). If the remaining battery power becomes low while the camera and the printer are connected, the status indicator blinks and the alarm beeps. If this happens during printing, stop printing at once. If not printing, disconnect the USB connection cable.

•Do not disconnect the USB connection cable while [å] (Cable disconnect prohibit icon) is displayed. (may not be displayed depending on the type of printer used)

•Before connecting or disconnecting the AC adaptor (optional), turn the camera off.

•Before inserting or removing a card/battery, turn the camera off, and disconnect the USB connection cable.

•Motion pictures cannot be printed out.

- 127 -