Panasonic DMC-TS25 owner manual 148, Lens, LCD monitor

Others

Lens

Recorded image may be warped, or nonexistent color is surrounding the subject.

•It is possible that the subject may be warped slightly, or the borders get colored, depending on the zoom magnification, due to the characteristics of the lens. Also, the peripherals of the image might look warped because the perspective is enhanced when the wide angle is used. This is not a malfunction.

The inner side of the lens is fogged.

•The inside of the lens may fog due to condensation depending on the environment this unit is used in, areas that undergo a significant change in temperature or in high humidity, etc. Refer to “When inner side of the lens is fogged (condensation)” on P7 for what to do.

LCD monitor

The LCD monitor becomes darker or brighter for a moment.

•This phenomenon appears when you press the shutter button halfway to set the aperture value and does not affect the recorded pictures.

•This phenomenon also appears when the brightness changes when the camera is zoomed or when the camera is moved. This is because of operation of the automatic aperture of the camera, and it is not a malfunction.

The LCD monitor flickers indoors.

•The LCD monitor may flicker for a few seconds after this unit is turned on. This is an operation to correct flicker caused by lighting such as fluorescent lights, LED lights etc. and is not a malfunction.

The LCD monitor is too bright or dark.

•Is [Monitor Luminance] active? (P45)

•Perform [Monitor Display]. (P44)

Black, red, blue and green dots appear on the LCD monitor.

•This is not a malfunction.

These pixels do not affect the recorded pictures.

Noise appears on the LCD monitor.

•In dark places, noise may appear to maintain the brightness of the LCD monitor. This does not affect the pictures you are recording.

- 148 -