Panasonic DMC-TZ65, DMC-TZ7 operating instructions Burst, Digital Zoom, Color Mode, Stabilizer

Using REC/MOTION PICTURE menu

(Continued)

REC/PLAY switch:

I.EXPOSURE

Automatically adjusts contrast and exposure to give more lifelike colours when there is significant contrast between background and subject.

MODE: → REC/MOTION PICTURE menu → REC menu

Settings: OFF/ON ( displayed on screen)

Even if ‘SENSITIVITY’ is set to ‘80’ or ‘100’, when I.EXPOSURE is activated, images may be taken at a higher sensitivity than the setting.

Correction effects may not be achieved under certain conditions.

BURST

Enables a rapid succession of photographs to be taken. Succession of photographs taken while shutter button is held down.

MODE: → REC menu

→ REC menu

Settings:

BURST setting		Speed								No. of pictures 1
OFF						No burst
	(Burst)	2.3 pictures/sec. (	)							Fine: Max. 3
		2.5 pictures/sec. (			)					Standard: Max. 5
	(Free)	Approx. 1.8 pictures/sec		2 (			)		Until card/built-in memory is full
		Approx. 2.0 pictures/sec		2 (				)

1 : When using self-timer: Fixed at 3 pictures

2 : Becomes progressively slower. (Delayed timing depends on card type, PICTURE SIZE, and QUALITY.)

Focus is fixed from first picture.

When is selected, the exposure and white balance are fixed to the settings for the first picture.

When is selected, exposure and white balance is adjusted for each picture. Burst speed may be reduced if SENSITIVITY is set to high, or if shutter speed is reduced in darker locations.

When burst setting is used, flash is set to ‘FORCED FLASH OFF’, and AUTO

BRACKET, MULTI ASPECT , and AUDIO REC. settings are cancelled. Settings will be stored even if power is turned off.

When using while following a moving subject in locations with major differences in brightness, optimal exposure may not be achieved.

Auto review performed regardless of AUTO REVIEW setting.

Cannot set to BURST in TRANSFORM, PANORAMA ASSIST, HI-SPEED BURST, FLASH BURST, STARRY SKY, PIN HOLE, and FILM GRAIN scene modes.

Using the ‘HI-SPEED BURST’ scene mode allows a faster succession of photographs to be taken. FLASH BURST is convenient to take continuous still pictures using flash in dark places. (P.56)

76 VQT1Z93

See P.18 for menu setting procedure.

DIGITAL ZOOM

Multiplies effect of optical zoom or extra optical zoom by up to 4 times. (See P.39 for details)

MODE: → REC/MOTION PICTURE menu

→ REC menu

Settings: OFF/ON

This is fixed at ‘ON’ when MACRO ZOOM is set.

COLOR MODE

Set colour effects.

MODE: → REC/MOTION PICTURE menu

→ REC menu

Settings: STANDARD / NATURAL (soft) / VIVID (sharp) / B/W / SEPIA / COOL (more blue) / WARM (more red)

If interference is noticeable in dark locations: Set to ‘NATURAL’.

In (INTELLIGENT AUTO mode), ‘STANDARD’, ‘B/W’, and ‘SEPIA’ only can be set. ‘NATURAL’ and ‘VIVID’ cannot be set for motion picture recording.

STABILIZER

Automatically detects and prevents jitter.

MODE: → REC menu

→ REC menu

Settings:

Settings	Effect
OFF	Pictures deliberately taken with no jitter correction
AUTO	The optimum image stabilizer is performed automatically based on the recording
	conditions.
MODE1	Constant correction
	(Monitor image stable, composition easy to determine)
MODE2	Correction at moment shutter button is pressed
	(More effective than MODE1)

Setting fixed to ‘MODE2’ in ‘SELF PORTRAIT’ and ‘OFF’ in ‘STARRY SKY’ scene modes.

Cases where optical image stabilizer may be ineffective:

Heavy jitter, high zoom ratio (including digital zoom range), fast-moving objects, indoors or in dark locations (due to low shutter speed)

This is fixed at ‘MODE1’ during motion picture recording.

VQT1Z93 77