Recording Modes

3

4

5

Press 2 ( ).

Press 3/4/2/1 to determine the area to be enlarged, and press [MENU/SET].

The assist screen is displayed, enlarging the area. (MF Assist)

If you press [DISP.], the area to be enlarged will be reset to the center.

Operate the manual ring to set the focus.

Rotate to A side:

Focuses on nearby subject

Rotate to B side:

Focuses on faraway subject

AIndicator for ¶ (infinity)

BMF Assist (enlarged screen) C Peaking

D MF Guide

The in-focus portions will be highlighted. (Peaking)

You can check whether the point of focus is to the near side or to the far side. (MF Guide)

A

B

B

A C D

Displaying the MF Assist

It is displayed by rotating the manual ring.

It can also be displayed by pressing 2 to display the setup screen for the enlarged area, deciding the area to enlarge using the cursor button, and then pressing [MENU/SET].

Changing the display of the MF Assist

Each time the rear dial is pressed, an enlarged display switches between a windowed screen display and a full screen display.

If the rear dial is rotated, the display can be enlarged/reduced up to approximately 3 to 6 times when the enlarged display is in a windowed display or up to approximately 3 to 10 times when the enlarged display is in a full screen display.

Closing the MF Assist

It will close when the shutter button is pressed halfway.

You can also close MF Assist by pressing [MENU/SET].

If you have displayed the MF Assist by rotating the manual ring, it will close approximately 10 seconds after you stop operating the camera.

42 SQT0196 (ENG)

Page 42
Image 42
Panasonic DMCFZ1000 owner manual Operate the manual ring to set the focus