Panasonic DMCFZ1000 owner manual Setting up a connection using the NFC function, Camera, Again

Using the Wi-Fi function

When using an Android device

Setting up a connection using the NFC function

•If [ ] is not displayed on the smartphone, the NFC function of the smartphone is disabled. Read the operating instructions of your smartphone and enable it.

•This function can be used with the NFC compatible device with Android (OS version 2.3.3 or higher). (excluding some models)

1Launch “Image App” on your smartphone.

2	While [ ] is displayed on the screen of the
	smartphone, touch the smartphone to [ ]
3	of the camera.
	When the connection confirmation screen
4	is displayed on the camera, select [Yes].
	Touch the smartphone to [ ] of the camera

again.

•Steps 3 through 4 are not required from the second time on.

• For information on the operation and settings of NFC- compatible smartphones, refer to the operating instructions of your device.

When using an Android device

Using the QR code to set up a connection

1 Press and hold [Wi-Fi] on the camera.

2Start “Image App” on your smartphone.

3 Select [QR code].

4Scan the QR code displayed on the screen of the camera.

A QR code

• If you press [MENU/SET] on the camera, the QR code will

be enlarged. When it is difficult to scan the QR code, try enlarging it.

(If the scanning is not successful, move the camera and

the smartphone further away from each other and try againA or use a connection method other than the QR code

method.)

(ENG) SQT0196 59