Panasonic DMC-GF1C, DMCGF1CK, DMCGF1KK Taking Pictures using the Built-in Flash, Applicable modes

Advanced (Recording pictures)

[REC] mode:

Taking Pictures using the Built-in Flash

ATo open the flash B To close the flash

Press the flash until it clicks.

• Be sure to close the flash when not in use.

• The flash setting is fixed to [Œ] while the flash is closed.

Note

•Be careful not to catch a finger when closing a flash bulb.

Switching to the appropriate flash setting

Applicable modes:

Set the built-in flash to match the recording.

•Open the flash.

Select [FLASH] in the [REC] mode menu. (P28)

Press 3/4 to select a mode and press [MENU/SET].

•For information about flash settings that can be selected, refer to “Available flash settings by recording mode”. (P60)

Press [MENU/SET] to close the menu.

•You can also press the shutter button halfway to close the menu.

Item Description of settings

:AUTO The flash is automatically activated when the recording conditions make

‡it necessary.

The flash is automatically activated when the recording conditions make

:	it necessary.
	It is activated once before the actual recording to reduce the red-eye
AUTO/Red-eye	phenomenon (eyes of the subject appearing red in the picture) and then
reduction¢	activated again for the actual recording.

•Use this when you take pictures of people in low lighting conditions.

‰: Forced flash ON	The flash is activated every time regardless of the recording conditions.
	• Use this when your subject is back-lit or under fluorescent light.
:	The flash is activated every time regardless of the recording conditions.
Forced ON/Red-eye	Simultaneously it reduces the red-eye phenomenon.
reduction¢	• Use this when your subject is back-lit or under fluorescent light.

VQT2G44 59