Panasonic DMCGF1CK, DMCGF1KK, DMC-GF1C Set the O.I.S. switch to on, Optical Image Stabilizer

Preparation

∫Optical Image Stabilizer

The Optical Image Stabilizer function is set for activation when the lens is attached to the camera body.

A lens which supports the stabilizer function is required.

–The 20 mm/F1.7 interchangeable lens supplied with the DMC-GF1C does not support the stabilizer function.

–The 14-45 mm/F3.5-5.6 interchangeable lens supplied with the DMC-GF1K supports the stabilizer function.

Set the [O.I.S.] switch to [ON].

• You can change the Optical Image Stabilizer mode to [MODE1], [MODE2] or [MODE3] using [STABILIZER] in the [REC] mode menu. (P117) It is set to [MODE1] at the time of purchase.

• We recommend setting the [O.I.S.] switch to [OFF] when

using a tripod. If the [O.I.S.] switch is set to [OFF], [ ] is displayed on the LCD monitor/optional external viewfinder.

Detaching a lens from the camera body

Attach the lens cap.

Press the lens release button D while turning the lens as far as possible in the direction of the arrow to detach it.

• Always attach the body cap to the camera body so that dirt or dust does not get inside.

• Attach the lens rear cap so that the lens contact point does not get scratched.

Note

•Change lenses where there is not a lot of dirt or dust. Refer to P169 when dirt or dust gets on the lens.

•When you turn the camera off or carry the camera, attach the lens cap to protect the surface of the lens.

•Be careful not to lose the lens cap, the lens rear cap and the body cap.

18 VQT2G44