Panasonic DMCGF1CK, DMCGF1KK, DMC-GF1C Inserting and Removing the Card optional/the Battery

Preparation

Note

•The operating times and number of recordable pictures will differ according to the environment and the operating conditions.

For example, in the following cases, the operating times shorten and the number of recordable pictures is reduced.

–In low-temperature environments, such as on ski slopes.

–When using [AUTO POWER LCD] or [POWER LCD] (P33).

–When operations such as flash and zoom are used repeatedly.

•When the operating time of the camera becomes extremely short even after properly charging the battery, the life of the battery may have expired. Buy a new battery.

Inserting and Removing the Card (optional)/the Battery

•Check that this unit is turned off.

•Close the flash.

•We recommend using a Panasonic card.

Slide the release lever in the direction of the arrow and open the card/battery door.

•Always use genuine Panasonic batteries (DMW-BLB13PP).

•If you use other batteries, we cannot guarantee the quality of this product.

OPEN LOCK

Battery: Insert until it is locked by the lever A being careful about the direction you insert it. Pull the lever A in the direction of the arrow to remove the battery.

Card: Push it fully until it clicks being careful about the direction you insert it. To remove the card, push the card until it clicks, then pull the card out upright.

B: Do not touch the connection terminals of the card.

•The card may be damaged if it is not fully inserted.

1:Close the card/battery door.

2:Slide the release lever in the direction of the arrow.

•If the card/battery door cannot be completely closed, remove the card, check its direction and then insert it again.

OPEN LOCK

24 VQT2G44