Panasonic DMC-GF1C Setting Date/Time Clock Set, Turn the camera on, Press MENU/SET to set

Preparation

Setting Date/Time (Clock Set)

•The clock is not set when the camera is shipped.

Turn the camera on.

A[MENU/SET] button

Press [MENU/SET].

Press 2/1 to select the items (year, month, day, hour, minute, display sequence or time display format), and press 3/4 to set.

OFF ON

MENU /SET

:

:

A: Time at the home area

B: Time at the travel destination (P113)

‚: Cancel without setting the clock.

• Select either [24HRS] or [AM/PM] for the time display format.

•AM/PM is displayed when [AM/PM] is selected.

•When [AM/PM] is selected as the time display format, midnight is displayed as

AM 12:00 and noon is displayed as PM 12:00. This display format is common in the US and elsewhere.

Press [MENU/SET] to set.

•Turn the camera off after finishing setting the clock. Then turn it on and check that the clock setting is correct.

•When [MENU/SET] has been pressed to complete the settings without the clock having been set, set the clock correctly by following the “Changing the clock setting” procedure below.

Changing the clock setting

Select [CLOCK SET] in the [SETUP] menu, and press 1. (P28)

•It can be changed in steps 3 and 4 to set the clock.

•Once a charged battery has been installed for 24 hours, the clock setting is maintained for 3 months using the built-in clock battery even without the battery.

Note

•The clock is displayed when [DISPLAY] is pressed several times during recording.

26 VQT2G44