Panasonic DMCZS8K manual Message displays, No additional selections can be made

Message displays

[This memory card cannot be used]

ƔA MultiMediaCard was inserted.

Not compatible with the camera. Use a compatible card.

[Some pictures cannot be deleted] [This picture cannot be deleted]

ƔNon-DCF pictures ( 37) cannot be deleted.

Save needed data on a computer or other device, and then use [Format] on the camera. ( 23)

[No additional selections can be made]

ƔThe number of pictures that can be deleted at once has exceeded.

ƔMore than 999 pictures have been set as favorites.

ƔThe number of pictures allowing [Title Edit], [Text Stamp] or [Resize] (multiple settings) at once has exceeded.

[Cannot be set on this picture]

Ɣ[Print Set], [Title Edit], or [Text Stamp] cannot be made for non-DCF pictures ( 37).

[Please turn camera off and then on again] [System Error]

ƔThe lens is not working correctly. Turn on power again.

(Consult the dealer or your nearest Service Center if display still remains)

[Some pictures cannot be copied] [Copy could not be completed]

ƔPictures cannot be copied in following cases.

Picture of same name already exists in built-in memory when copying from card. File is not of DCF standard. ( 37)

Picture taken or edited on a different device.

[Not enough space on built-in memory] [Not enough memory on the card]

ƔThere is no space left on the built-in memory or the card. When you copy pictures from the built-in memory to the card (batch copy), the pictures are copied until the capacity of the card becomes full.

[Built-In Memory Error] [Format built-in memory?]

ƔDisplayed when formatting built-in memory via computer, etc. Reformat directly using camera. Data will be deleted.

[Memory Card Error] [Format this card?]

ƔThe card format cannot be used with this camera.

Save needed data on a computer or other device, and then use [Format] on the camera. ( 23)

[Insert SD card again] [Try another card]

ƔAccess to card has failed. Insert card again.

ƔTry with a different card.

[Memory card error. This card cannot be used in this camera. Format this card?]

ƔCard is not of SD standard.

ƔWhen cards in capacities of 4 GB or more are used, only SDHC or SDXC Memory Cards are supported.

Meanings of and required responses to major messages displayed on LCD monitor.

[Read Error]/[Write Error] [Please check the card]

ƔData read has failed.

Check whether card has been inserted correctly ( 12).

ƔData write has failed.

Turn off power and remove card, before re-inserting and turning on power again.

ƔCard may possibly be damaged.

ƔTry with a different card.

[Motion recording was cancelled due to the limitation of the writing speed of the card]

ƔIf recording stops even when using a card of the recommended speed class ( 14), the data writing speed has dropped. If this happens, we recommend backing up the data on the memory card and formatting it ( 23).

ƔMotion picture recording may be automatically terminated with certain cards.

[A folder cannot be created]

ƔFolder numbers in use have reached 999.

Save needed data on a computer or other device, and then use [Format] on the camera. ( 23) Folder number is reset to 100 when performing [No.Reset] ( 22).

[Picture is displayed for 16:9 TV] [Picture is displayed for 4:3 TV]

ƔAV cable (supplied) is connected to the camera.

To remove message immediately Press [MENU/SET].

To change aspect ratio Change [TV Aspect] ( 23).

ƔUSB connection cable (supplied) is only connected to the camera. Message disappears when cable is also connected to another device.

[This battery cannot be used]

ƔUse a genuine Panasonic battery.

ƔBattery cannot be recognized as terminal is dirty. Wipe any dirt away from the battery terminal.

112 VQT3H43 VQT3H43 113