120 VQT3H43 VQT3H43 121 Usage cautions and notes
When in use
ƔCamera may become warm if used for long periods of time, but this is not a fault.
ƔKeep the camera as far away as possible from electromagnetic equipment (such
as microwave ovens, TVs, video games etc.).
• If you use the camera on top of or near a TV, the pictures and sound on the camera
may be disrupted by electromagnetic wave radiation.
• Do not use the camera near cell phones because doing so may result in noise
adversely affecting the pictures and sound.
• Recorded data may be damaged, or pictures may be distorted, by strong magnetic
fields created by speakers or large motors.
• Electromagnetic wave radiation generated by microprocessors may adversely affect
the camera, disturbing the pictures and sound.
• If the camera is adversely affected by electromagnetic equipment and stops
functioning properly, turn the camera off and remove the battery or disconnect AC
adaptor (optional). Then reinsert the battery or reconnect AC adaptor and turn the
camera on.
Do not use the camera near radio transmitters or high-voltage lines.
• If you record near radio transmitters or high-voltage lines, the recorded pictures and
sound may be adversely affected.
ƔDo not extend the supplied cord or cable.
ƔDo not allow camera to come into contact with pesticides or volatile substances (can
cause surface damage or coating to peel).
ƔNever leave the camera and the battery in a car or on a car hood in the summer.
It may cause leakage of the battery electrolyte, a generation of heat, and may cause a
fire and the battery to burst due to the high temperature.
Caring for your camera
To clean your camera, remove the battery or disconnect the power plug from the outlet,
and wipe with a soft, dry cloth.
ƔUse a damp cloth to remove stubborn stains, before wiping with a dry cloth.
ƔDo not use benzene, thinners, alcohol, or kitchen detergent, as these may damage the
outer casing and finish of the camera.
ƔIf using a chemically-treated cloth, read the supplied instructions carefully.
ƔDo not touch the lens barrier.
When not using for a while
ƔTurn off camera power before removing battery and card (ensure that battery is
removed to prevent damage through over-discharge).
ƔDo not leave in contact with rubber or plastic bags.
ƔStore together with a drying agent (silica gel) if leaving in a drawer, etc. Store batteries
in cool (15 °C - 25 °C (59 °F - 77 °F)) places with low humidity (40 %RH - 60 %RH) and
no major temperature changes.
ƔCharge battery once per year and use completely before storing again.
Memory cards
ƔTo prevent damage to cards and data
• Avoid high temperatures, direct sunlight, electromagnetic waves, and static electricity.
• Do not bend, drop, or expose to strong impacts.
• Do not touch connectors on reverse of card or allow them to become dirty or wet.
ƔWhen disposing of/transferring memory cards
• If using the “format” or “delete” functions on your camera or computer, this only
changes the file management information, and does not completely delete the data
from within the memory card. When disposing of or transferring your memory cards,
we recommend physically destroying the memory card itself, or using commercially
available computer data erasing software to completely delete the data from the card.
Data within memory cards should be managed responsibly.
LCD monitor
ƔDo not press hard on the LCD monitor. This may cause uneven display and damage
the monitor.
ƔIn cold climates or other situations when the camera becomes cold, the LCD monitor
may be slightly less responsive than normal immediately after startup. Normal
brightness will return once the internal components have warmed up.
Extremely high precision technology is employed to produce the LCD monitor screen.
However there may be some dark or bright spots (red, blue or green) on the screen.
This is not a malfunction.
The LCD monitor screen has more than 99.99% effective pixels with a mere 0.01%
of the pixels inactive or always lit. The spots will not be recorded on pictures on the
built-in memory or a card.