24 VQT3V42
Setup menu
Change the unit’s settings if necessary. The
settings remain intact even if you switch the unit
to standby.
Some items in the Setup menu are common to
the Option menu. You can get the same effect
with both menus.
About Multi User Mode
: Settings of the items with this indication are
saved by the respective users registered in the
HOME menu.
Please refer to page 15 for details about user
registration and switching.
1While displaying the HOME menu, press
[SETTINGS].
2Select an item and change the settings.
To exit the screen
Press [EXIT].
∫Picture Mode (>23)
∫Picture Adjustment (>23)
∫HDMI Output
¾HDMI Video Format
The items supported by the connected devices
are indicated on the screen as “¢”. When any
item without “¢” is selected, the images may be
distorted.
≥If “Automatic” is selected, the best suited
output resolution to the connected television
is automatically selected.
≥To enjoy high-definition video up-converted to
1080p, you need to connect the unit directly
to 1080p compatible HDTV (High Definition
Television). If this unit is connected to an
HDTV through other equipment, the other
equipment must also be 1080p compatible.
¾24p Output
When this unit is connected to a TV supporting
1080/24p output using an HDMI cable, movies
and other material recorded at 24p are output at
24p.
≥When BD-Video images other than 24p are
played, images are output at 60p.
≥24p : A progressive image recorded at a rate
of 24 frames per second (motion-picture film).
Many BD-Video movie contents are recorded
in 24 frames/second in accordance with the
film materials.
¾Deep Colour Output
This setting is for selecting whether to use Deep
Colour output when a television that supports
Deep Colour is connected.
¾Contents Type Flag
Depending on the playback content, the TV will
output adjusting to the optimal method when a
TV that supports this function is connected.
Player Settings
System
Ratings
Network
Language
Sound
Picture
NTSC Contents Output
HDMI Output
Picture Adjustment
Picture Mode
NTSC
Normal

Picture

Press [OK] to show the following settings:
∫NTSC Contents Output
(This works only for video output from the VIDEO
OUT terminal.)
Select PAL60 or NTSC output when playing
NTSC discs.
DMP-BD77GN-VQT3V42.book 24 ページ ２０１２年２月２１日　火曜日　午前１０時５分