26 VQT3V42
∫Easy Network Setting (>11)
∫Network Settings
Perform network-related settings individually.
¾LAN Connection Mode
Select the LAN connection method.
¾Wireless Settings
This allows the wireless router and connection
settings to be set. Current connection settings
and connection state can be checked.
Connection Setting
The wireless router connection wizard will be
displayed.
Double Speed Mode Setting (2.4GHz)
When a 2.4GHz wireles s format is used, this
sets the connection speed.
≥If you connect using the “Double Speed
Mode (40MHz)”, 2 channels use the same
frequency band, and there is consequently
a greater risk of reception interference. This
can cause the connection speed to drop or
become unstable.
¾IP Address / DNS Settings
This is for checking the state of the network
connection and setting the IP address and
DNS-related.
¾Proxy Server Settings
This is for checking the state of connection with
the Proxy server and performing settings.
¾Remote Device Settings (>20)
Remote Device Operation
Enable to operate by DMC.
Device Name Entry
Set the name of this unit to be displayed on
the connected equipment.
Registration Type
Remote Device List
Registering/deregistering of the displayed
equipment can be performed when “Manual”
in “Registration Type” is selected.
¾BD-Live Internet Access (>17)
You can restrict Internet access when BD-Live
functions are used.
≥If “Limit” is selected, Internet access is
permitted only for BD-Live contents which
have content owner certificates.
Network
Press [OK] to show the following settings:
Press [OK] to show the respective setting.
Press [OK] to show the respective setting.
[Except[South[East[Asia]
¾Network Drive Connection
It is possible to access the shared folder of
equipment not compatible with DLNA, such as
the Windows XP operating system, and play
back video, still pictures, and music on this unit.
For the setting and operation method of
connected equipment, refer to the following
Website.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
Press [OK] to show the following settings:
≥If “On” is selected, “Quick Start” is fixed to
“On”.
Automatic
Allow connection to all the
equipment that is
accessing this unit.
Manual
Set the permission of the
connection individually for
the equipment that is
accessing this unit.
DMP-BD77GN-VQT3V42.book 26 ページ ２０１２年２月２１日　火曜日　午前１０時５分