32 VQT3V42
Messages
The following messages or service numbers may
appear on the TV or unit’s display.
Cannot play.
Cannot play on this unit.
¾You tried to play a non-compatible image.
No disc inserted.
¾The disc may be upside down.
$ This operation is not available.
¾Some operations are unsupported by the unit.
For example;
IP address is not set.
¾The “IP Address” in “IP Address / DNS
Settings” is “---. ---. ---. ---”. Set the “IP
Address”, “Subnet Mask”, and “Gateway
Address”. (Select the automatic address
acquisition if necessary.)
The wireless access point currently has a low
network security setting. It is recommended to
change to a higher setting.
¾Authentication type for the wireless LAN is set
to “Open system”, or the encryption type is
set to “No encryption”. It is recommended to
encrypt for safety reasons. For details, refer
to the instructions of the wireless router being
used. Encryption is required when playing
back video, etc., from DLNA compatible
devices.
SEt
(“” stands for a number.)
¾The remote control and main unit are using
different codes. Change the code on the
remote control.
H or F
(“” stands for a number.)
¾There is something unusual.
¾Check the unit using the troubleshooting
guide. If the service number remains
displayed, do the following.
If the service number remains displayed despite
doing the above, request service from the dealer.
Inform the dealer of the service number when
requesting service.

On the television

¾You inserted an incompatible disc.
– During playback, reverse slow-motion or
reverse frame-by-frame is not possible.

On the unit’s display

Press and hold [OK] and
the indicated number
button at the same time
for more than 5 seconds.
1Disconnect the plug from the household
mains socket, wait a few seconds, then
reconnect it.
2Press [Í/I] to turn the unit on.
DMP-BD77GN-VQT3V42.book 32 ページ ２０１２年２月２１日　火曜日　午前１０時５分