Panasonic DMR-EH56 TV System, Press 3, 4 to select To Others and press Enter, ≥Ntsc

While stopped

Press [FUNCTIONS].

Changing the unit’s settings

Refer to the control reference on page 65.

Restart set up

You can restart auto channel setting if set up (➡ 18) fails for some reason. After performing steps 1–4 (➡ 69)

5 Press [3, 4] to select “Auto-Setup

Restart” or “Download from TV” and press [ENTER].

The confirmation screen appears.

Select “Download from TV” when you connect the unit to a Q Link compatible TV with a fully wired 21-pin Scart cable. (Programme positions are downloaded from the TV and copied through this convenient function.)

6 Press [2, 1] to select “Yes” and press [ENTER].

≥If the country setting menu appears on the television Press [3, 4, 2, 1] to select the country and press [ENTER].

You can also use the following method to restart Auto-Setup.

When the unit is on and stopped

Press and hold [X CH] and [CH W] on the main unit until the country setting screen appears.

All the settings except for the ratings level, ratings password and time settings return to the factory preset. The timer recording programmes are also cancelled.

To return to the previous screen

Press [RETURN].

To exit the screen

Press [RETURN] several times.

When the GUIDE Plus+ system setting message appears. ≥If you want to setup the GUIDE Plus+ system

Press [2, 1] to select “Yes” and press [ENTER]. Go to step 2 on page 19.

≥If you do not want to setup the GUIDE Plus+ system Press [2, 1] to select “No” and press [ENTER]. Television picture appears. Setup is complete.

	List of TV Reception Channels
	Channel		TV Channel
				Other
	indication	Germany/Italy	France
				Countries
	2 – 4		2 – 4
			5 – 10, G – J
		E2 – E10	(172.00 to
	5 – 10		220.00 MHz)
			(INTER	E2 – E12
			BANDE)
		E11 – E12
	11 – 12	(Germany)	—
		H1 – H2 (Italy)
	13 – 20	A – H (Only	—	—
		Italy)
	21 – 69	E21 – E69	E21 – E69	E21 – E69
	74 – 78	S01 – S05	—	S1 – S5
	80	S1	—	M1
			B – F
			(100.00 to
	81 – 89	S2 – S10	172.00 MHz)	M2 – M10
			(INTER
			BANDE)
			K – Q (220.00
	90 – 99	S11 – S20	to 300.00 MHz)	U1 – U10
			(INTER
			BANDE)
			S21 – S41
		S21 – S41§	(299.25 to	S21 – S41
	121 – 141		467.25 MHz)
		(Hyperband)		(Hyperband)
RQT8415			(INTER
70			BANDE)
	§ Only for 8 MHz channel raster

TV System

Change the setting to match the equipment you are connecting with, or to match the title when there are both PAL and NTSC titles on the HDD.

1

2 Press [3, 4] to select “To Others” and press [ENTER].

3 Press [3, 4] to select “Setup” and press [ENTER].

4 Press [3, 4] to select “Connection” and press [1].

5 Press [3, 4] to select “TV System” and press [ENTER].

6 Press [3, 4] to select the TV system and press [ENTER].

Setup	TV System
	PAL
Tuning	NTSC
Disc
Picture
Sound
Display	SELECT
Connection	ENTER
Others	RETURN

≥PAL (factory preset)

–Select when connecting to a PAL or Multi-system television. Titles recorded using NTSC are played as PAL 60.

–Select to record television programmes and PAL input from other equipment.

–[HDD]Select when playing a PAL input title recorded on the HDD.

≥NTSC

–Select when connecting to a NTSC television. Television programmes cannot be recorded properly.

–Select to record NTSC input from other equipment.

–[HDD]Select when playing a NTSC input title recorded on the HDD.

7 Press [2, 1] to select “Yes” and press [ENTER].

To return to the previous screen

Press [RETURN].

To exit the screen

Press [RETURN] several times.

∫To change the setting all at once (PAL!#NTSC)

While stopped, keep pressing [∫] and [< OPEN/CLOSE] on the main unit for 5 or more seconds.

[Note]

≥This unit cannot record to discs containing both PAL and NTSC signals. (However, both types of programmes can be recorded onto the HDD.)

≥If “NTSC” has been selected, the GUIDE Plus+ system cannot be used.