Panasonic DMR-ES15 warranty Remote control settings, Clock settings, Television operation

Remote control settings

Refer to the control reference on page 14.

Television operation

You can operate the TV through the unit’s remote control.

Point the remote control at the television

While pressing [^ POWER TV], enter the code with the numbered buttons.

e.g., 0250: [0] Ô [2] Ô [5] Ô [0]

Manufacturer and Code No.

Panasonic	0051/0250	PHILIPS (RC-5)	0054
National
		RCA	0047
QUASAR
		SAMSUNG	0060/0587/
			0702
FISHER	0154	SANYO	0154
GE	0047	SHARP	0093/0165
GOLDSTAR	0178/0317/	SONY	0000
	0457
HITACHI	0145	SYLVANIA	0054
JVC	0053	THOMSON	0047
LG	0178/0317/	TOSHIBA	0156
	0457
MAGNAVOX	0054	ZENITH	0017
MITSUBISHI	0150

Test by turning on the television and changing channels. Repeat the procedure until you find the code that allows correct operation.

•If your television brand is not listed or if the code listed for your television does not allow control of your television, this remote control is not compatible with your television.

When other Panasonic products respond to this remote control

When other Panasonic products placed nearby affect this unit’s remote control, change the remote control code on the main unit and the remote control (the two must match).

Use “1”, the factory set code, under normal circumstances.

To change the code on the main unit 1 While stopped

Press [SETUP].

2 Press [e,r] to select “Setup” and press [q].

3 Press [e,r] to select “Remote Control Code” and press [ENTER].

4 Press [e,r] to select the code (“1”, “2” or “3”) and press [ENTER].

Setup	Remote Control Code
	Press " " and "ENTER" together
	for more than 2 seconds on the remote.
Channel

Setup

Disc

Video

A di

To change the code on the remote control

5 While pressing [ENTER], press and hold the numbered button ([1], [2] or [3]) for more than 2 seconds.

6 Press [ENTER].

nWhen the following indicator appears on the unit’s display

Press and hold [ENTER] and the indicated number button at the same time for more than 2 seconds.

To exit the screen

Press [SETUP].

Clock settings

Refer to the control reference on page 14.

Set Clock Manually

In the case of a power failure, the clock setting remains in memory							settings
for approximately 1 minute.
1	While stopped
2	Press [SETUP].						settings/Clock
	Press [e,r] to select “Setup” and
3	press [q].
	Press [e,r] to select “Clock Settings”
	and press [ENTER].
							control
4 Press [e,r] to select “Set Clock
	Manually” and press [ENTER].
							type/Remote
	Setup		Set Clock Manually
		Month	Day	Year Hour Minute
	Channel	1 /	1 /	2000 SAT 12	: 00 AM
	Setup
	Disc			DST	Time Zone	DST, Time Zone (Ô below)
	Video			Off	EST
	Audio
5 Press [w,q] to select the item you							captions/Television
	want to change and press [e,r] to
	change the setting.
	• DST (Daylight Saving Time): On or Off
	If you select “On”, the clock is advanced one hour starting at
	2 a.m. on the first Sunday in April and ending at 2 a.m. on
	the last Sunday in October.
	• Time Zone shows the time difference from Greenwich Mean
	Time (GMT).
							Channel
	EST (Eastern Standard Time)					= GMT –5
	CST (Central Standard Time)					= GMT –6
	MST (Mountain Standard Time) = GMT –7
	PST (Pacific Standard Time)					= GMT –8

	AST (Alaska Standard Time)	= GMT –9
6	HST (Hawaii Standard Time)	= GMT –10
	Press [ENTER].

The clock starts.

Adjust Time Zone

Adjust the time zone (–1 or +1) if it was not set correctly with auto clock setting.

You can set this menu only after “Set Clock Automatically” is completed.

1 While stopped

Press [SETUP].

2 Press [e,r] to select “Setup” and press [q].

3 Press [e,r] to select “Clock Settings” and press [ENTER].

4 Press [e,r] to select “Adjust Time Zone” and press [ENTER].

5 Press [e,r] to select “–1” or “+1” and press [ENTER].

To exit the screen

Press [SETUP].

To return to the previous screen

Press [RETURN].

RQT8314

To return to the previous screen	15
Press [RETURN].