Panasonic DMR-ES15 warranty Remote control information, Disc handling, Unit care

R6/LR6, AA

The remote control information

nBatteries

• Insert so the poles (+ and –) match those in the remote control.

• Do not use rechargeable type batteries.

• Do not mix old and new batteries.

• Do not use different types at the same time.

•Do not heat or expose to flame.

•Do not take apart or short circuit.

•Do not attempt to recharge alkaline or manganese batteries.

•Do not use batteries if the covering has been peeled off. Mishandling of batteries can cause electrolyte leakage which can damage items the fluid contacts and may cause a fire.

Remove if the remote control is not going to be used for a long period of time. Store in a cool, dark place.

nUse

Remote control signal sensor

	20
30	20
	30

7 m (23 feet) directly in front of the unit

Disc handling

nHow to hold a disc

Do not touch the recorded surface.

nConcerning non-cartridge

discs

Be careful about scratches and dirt.

nIf there is dirt or

condensation on the disc

Wipe with a damp cloth and then wipe dry.

nHandling precautions

•Do not attach labels or stickers to discs. (This may cause disc warping and un-balanced rotation, rendering it unusable.)

•Write on the label side of the disc only with a soft, oil-based felt pen. Do not use ballpoint pens or other hard writing implements.

•Do not use record cleaning sprays, benzine, thinner, static electricity prevention liquids or any other solvent.

•Do not use scratch-proof protectors or covers.

•Do not drop, stack, or impact discs. Do not place objects on them.

•Do not use the following discs:

–Discs with exposed adhesive from removed stickers or labels (rented discs, etc.).

–Discs that are badly warped or cracked.

–Irregularly shaped discs, such as

heart shapes.

• Do not place in the following areas:

–In direct sunlight.

–In very dusty or humid areas.

–Near a heater.

–Locations susceptible to significant differences in temperature (condensation can occur).

–Where static electricity or electromagnetic waves occur.

•To protect discs from scratches and dirt, return them to their cases or cartridges when you are not using them.

The manufacturer accepts no responsibility and offers no compensation for loss of recorded or edited material due to a problem with the unit or recordable media, and accepts no responsibility and offers no compensation for any subsequent damage caused by such loss.

Examples of causes of such losses are

•A disc recorded and edited with this unit is played in a DVD recorder or computer disc drive manufactured by another company.

•A disc used as described above and then played again in this unit.

•A disc recorded and edited with a DVD recorder or computer disc drive manufactured by another company is played in this unit.

Unit care

The precision parts in this unit are readily affected by the environment, especially temperature, humidity, and dust. Cigarette smoke also can cause malfunction or breakdown.

To clean this unit, wipe with a soft, dry cloth.

•Never use alcohol, paint thinner or benzine to clean this unit.

•Before using chemically treated cloth, carefully read the instructions that came with the cloth.

Observe the following points to ensure continued listening and viewing pleasure.

Dust and dirt may adhere to the unit’s lens over time, making it impossible to record or play discs.

Use the DVD lens cleaner (RP-CL720PP) about once every year, depending on frequency of use and the operating environment. Carefully read the lens cleaner’s instructions before use.

Do not place the unit on amplifiers or equipment that may become hot.

The heat can damage the unit.

Before moving the unit, ensure the disc tray is empty. Failure to do so will risk severely damaging the disc and the unit.

RQT8314

6