Panasonic DP-C213, DP-C264, DP-C323 manual 17

Key Operator

No.		Parameter	Comments	Selective Item	Standard
						Setting
40 - 59	44	Data Deletion of	Set the deletion security level of hard disk	Basic, Medium, High	Basic
		HD	data for every copy/print job.
			z When the optional hard disk unit is
			installed, every copy/print job data is
			automatically deleted after each job is
			completed.
			For higher security select Medium and
			High, however, the deletion time
			increases with the increase in security
			level, and may take longer to erase the
			data.
	45	WINS Server 1 IP	Set the IP address of WINS Server 1.	3 digits x 4	0. 0. 0. 0.
	46	WINS Server 2 IP	Set the IP address of WINS Server 2.	3 digits x 4	0. 0. 0. 0.
	47	Scope ID	Set the Net Bios Scope ID.	Up to 223 characters
	48	IP Filter	Set whether the IP filter is to provide	Off, On	Off
			security for network functions such as
			printer or scanner.
	49	IP Filter Mode	Set whether the registered “50 IP Filter	Allow, Deny	Allow
			Address” is allowed or denied for network
			functions.
	50	IP Filter Address	Set the IP filter address.	3 digits x 4	0. 0. 0. 0.
			Up to 4 addresses can be set.
			z When setting only one IP filter address,
			input the same IP address for both “Start
			Address” and “End Address”.
	51	Community Name	Set the SNMP community name (1).	Up to 15 characters	public
		(1)
	52	Community Name	Set the SNMP community name (2).	Up to 15 characters	public
		(2)
	54	SysContact	Set the system management name.	Up to 31 characters
	55	SysName	Set the system name.	Up to 31 characters	Panasonic
					DP-XXXX
	56	SysLocation	Set the system installation location.	Up to 31 characters
	59	SMB	Set whether to use the machine on the	Off, On	Off
			Microsoft Network (SMB).
60 - 79	60	SMB Master	Set whether to use the SMB Master	Off, On	Off
		Browser	Browser.

No. 45 to 60

After setting any of these parameters, turn the machine’s power switch Off, and then On again.

Settings General 2 Chapter

17