Panasonic DP-C213, DP-C264, DP-C323 No, Setting, Comments, Standard, Parameter, • Pserver, • Rprinter, Selective Item

Settings Printer 6 Chapter

88

Key Operator

No.		Parameter	Comments	Selective Item		Standard
						Setting
15 - 29	20	AppleTalk Printer Name	Set the AppleTalk printer	Up to 31 characters	Panasonic
			name.		DP-XXXX-
			z When the optional Printer		the lower
			Controller Module (for Adobe®		six figures
			PostScript® 3™) is installed.		of MAC
			There is no default value. When		Address
			the machine starts up under the
			following parameter settings "18
			Apple Talk" is set to "On", "19
			AppleTalk Zone Name", and
			"20 AppleTalk Printer Name"
			are not set, then, “Panasonic
			DP-XXXX and the lower six
			figures of MAC Address” will be
			automatically setup.
	21	AppleTalk Type Name	The machine detects, and
			display the AppleTalk Type
			Name on the Touch Panel.
			z The Apple Talk Type Name is
			displayed only, but cannot be
			set.
			z When the optional Printer
			Controller Module (for Adobe®
			PostScript® 3™) is installed.
	22	NetWare	Set “On” to use NetWare.	Off, On	Off
	23	NetWare Frame Type	Set the NetWare frame type.	802.3, 802.2, Ether-II,	802.2
				SNAP
	24	Selected Frame Type	The machine detects, and
			display the Frame Type on the
			Touch Panel.
			z Frame Type is displayed only,
			but cannot be set.
	25	NetWare Mode	Select NetWare Mode.	Pserver, Rprinter	Pserver
			• Pserver
			The machine is used as Print
			Server, and prints the waiting
			job stored in the machine.
			• Rprinter
			The machine is used as
			Remote Printer, and prints
			data which is sent from the
			Print Server.
	26	NetWare Printer Name	Set the NetWare printer name.	Up to 31 characters
	27	Print Server Name	Set the print server name.	Up to 31 characters
	28	Print Server Password	Set the print server password.	Up to 31 characters

No. 20 to 23, 25, to 28

After setting any of these parameters, turn the machine’s power switch Off, and then On again.