Panasonic DP-C213, DP-C264, DP-C323 Example : Departmental Counter, Close, Reset, Function, 3 Select “General Settings”, Example : Dept. Counter Mode, 4 Select “04 Departmental Counter”

Settings General 2 Chapter

28

Example : Departmental Counter

When the Dept. Counter Mode is selected, you can display your selected departmental counter.

zTo use the Dept. Counter Mode, a special service setting is necessary. Contact your authorized Panasonic dealer.

zFor instruction on how to set departmental counters, refer to Example : Dept. Counter Mode (see page 20).

zWhen the departmental counter function is enabled, the password (department code) entry screen appears on the touch panel display. If you do not enter the password (department code), you cannot use the Copy, Fax, Scan and Print function.

1 Enter the password (department code)	4 Select “04 Departmental Counter”.
of the department subject to count
display, and then select “OK”.

5 Select the counter you want to display.

2 Press the Function key.

3 Select “General Settings”.

zThe total departmental counter is displayed on the button. You cannot select this button.

6 After displaying the counter or copy limit, select “Close”.

zAfter setting up the function(s), press the Reset key to return the machine to the initial screen of the current active mode.