Example : Manual Skyshot Mode

In Manual Skyshot Mode, the scanning area (size) is pre-registered into memory (M1 and M2) in advance.This mode also allows copying an original without generating dark borders even if the platen cover is opened.

zAn incorrect exposure may occur when there is a black line at the edge of the original.

zSort function (Sort, Shift-Sort, Rotate-Sort, Staple-Sort) is not available in Manual Skyshot Mode.

1

Press the Function key.

5 Select the desired item, and then

2

Select “Copier Settings”.

select “OK”.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3

Select “5-9”.

“Off”

Manual Skyshot Mode is OFF.

 

 

“M1, On”

Copied in M1 size.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

“M2, On”

Copied in M2 size.

 

 

 

 

 

 

 

 

 

 

 

 

 

“M1, M2, On”

Copied in pre-registered size

 

 

 

 

 

(M1 or M2).

 

 

 

 

 

 

zFor changing M1/M2 size, refer to “M1, Size” or “M2, Size” (see page 37).

6 Select “Close”.

4 Select “09 Manual Skyshot Mode”.

zAfter setting up the function(s), press the Reset key to return the machine to the initial screen of the current active mode.

Settings Copier 3 Chapter

41