From 1-Sided Originals to 2-Sided Copies using Saddle Stitch (Booklet)

2 Chapter

zThe 2-Sided original cannot be copied into a booklet.

zOriginals should be placed on the ADF. (5.5" x 8.5" or 8.5" x 11" size is only available, up to 40 originals)

zSaddle stitch binding is possible only when the optional 1-Bin Saddle Finisher (DA-FS325) is installed. Ledger (11" x 17"), and Letter-R (8.5" x 11") are the only applicable paper sizes.

zThe standard setting for the copy size is the reduced size, however, the setting can be changed to a “original size”. Refer to Copier Settings in the Operating Instructions (For Function Parameters) on the provided CD- ROM.

zWhen the Fold Position is not matched with center position of the copies, set the binding margin. Refer to General Settings (For Key Operator) in the Operating Instructions (For Function Parameters) on the provided CD-ROM.

zStamping can be combined with the Booklet For Copying with Stamping, refer to Copying with Stamping (see page 61-69).

1 Select “2-Sided / Original->Copy”,

and then select “Booklet”.Select when binding the left side, or the top side of the page.

Select when binding the right side, or the bottom side of the page.

3 Select the cover page type if necessary.

1 Select “Cover”.

zTo display this screen, refer to steps 1 to 3 of

Basic Operation for the 2-Sided Copy Mode (see page 40).

2 Select a bind position.

Continue on the next page...

Features Menus More

43