Features Other 3 Chapter
88
Chapter 3 | Other Features |
Making Copies with the ADF Opened | |
|
The original can be copied without generating dark borders even if the ADF is opened.
Skyshot Mode
Skyshot Mode can be selected in the standard settings.
zWhen “2 Page” or “N in 1” is selected, only “Normal” can be set in Skyshot Mode.
zIf there is a white margin, less than 5 mm around the original, the edge of the copy may come out abnormal (white lines/streaks). To avoid the problem, change the setting of “Digital Skyshot Mode” to “No”. For setting of “Digital Skyshot Mode”, refer to Copier Settings in the Operating Instructions (For Function Parameters) on the provided
1 Open the ADF more than 45 degrees, | 5 Press the Start key. |
and then place the original on the | zPlace the next original, and follow the |
Platen Glass, leaving it open. | instructions described on the touch panel |
| display. |
| zAfter finishing copying, press the Reset key |
| to return to the initial screen of the current |
| active mode. |
Face Down. Align with top left corner.
zRefer to Placing Originals (Copy) in the Operating Instructions (For Basic Operations) of provided booklet.
2 Press the Copy key if the machine is set to other function mode.
3 Select copy features if necessary.
4 Enter the desired number of copies.