2Move the cursor to the desired position using
and 
.
3Update the date with the Keypad.
5 Select “OK”.
zFor the following steps, refer to steps 5 to 6 in the Basic Operation for Stamping (see page 61).
Features Menus More 2 Chapter
67
2Move the cursor to the desired position using
and .
3Update the date with the Keypad.
5 Select “OK”.
zFor the following steps, refer to steps 5 to 6 in the Basic Operation for Stamping (see page 61).
Features Menus More 2 Chapter
67