Features Menus More 2 Chapter

44

2 Select a cover type.

5 Select “OK”.

 

 

 

 

 

 

 

 

 

 

Blank

Not copied on the cover.

 

 

 

 

zFor the following procedure, refer to steps 5

 

 

 

 

 

 

 

 

 

 

 

Copy

Copied on the cover.

to 6 of Basic Operation for the 2-Sided

 

 

 

 

 

Copy Mode (see page 40).

 

zWhen “Blank” is selected as the cover type,

 

zWhen the Fold Position does not match with

 

up to 36 originals can be placed on the ADF.

 

the center position of the copies, set the

3 Select “Cover” to select a paper.

binding margin. Refer to General Settings

 

 

 

 

 

in the Operating Instructions (For Function

 

 

 

 

 

Parameters) on the provided CD-ROM.

 

 

 

 

 

zThe stapled copies are delivered to the

 

 

 

 

 

saddle tray of the 1-bin saddle finisher as

 

 

 

 

 

shown below.

 

 

 

 

 

 

 

 

 

 

 

 

 

zWhen changing paper other than the cover, press the Copy key on the Control Panel. If the paper of desired size is available on the tray, the display changes.

Select a paper size from the display.

4 Select “OK” to exit the cover settings.

Staple position

Saddle tray