Features Menus More 2 Chapter

„Job Build

This is useful, when copying multiple sets of originals that exceed the maximum capacity of the ADF of 85 sheets (20 lb). (See the Example below)

Ex: To make 5 sets of sorted copies of 100-sheet of originals.

(a)Place the first 85 sheets of originals on the ADF.

(b)Select “2-Sided / Original->Copy” Copy menu, and select Job “Job Build and SADF”.

(c)Select “Sort / Finish” menu, and select the desired Sorting/Finishing end result.

(d)Press the Start key.

(e)After scanning the first 85 sheets, you can place the remaining 15 sheets of originals on the ADF within 5 second to continue copying without interrupting the cycle.

Or if you do nothing, the machine will display “Another original? / Yes or No”.

(f)Place the remaining 15 sheets of originals on the ADF tray, and select “Yes”.

(g)After scanning the remaining 15 sheets, “Another original? / Yes or No” will display, select “No” to start the printing process.

1

85

Originals:85 sheets <1st scan>

1

100

1st and 2nd Scanning Data are

86combined into one job.

100

Originals: Remaining 15 sheets <2nd scan>

5 sets of 100-sheet sorted copies are printed

zOriginal should be placed on the ADF.

zUp to 999 sheets of the originals can be scanned in one job.

The maximum capacity of the scanned data can be reached less than 999 sheets of the originals depending on the type of sheets being scanned.

If the memory becomes full during scanning, follow the instructions on the Display.

48