STEP 2 The remote control
setup
∫Enjoying multi-channel surround sound
∫Batteries
≥Insert so the poles (i and j) match those in the |
Quick
Amplifier with a
COAXIAL IN
Coaxial cable
Back of the unit
R6/LR6, AA
remote control. |
≥Do not use rechargeable type batteries. |
Do not:
≥mix old and new batteries. |
≥use different types at the same time. |
≥heat or expose to flame. |
≥take apart or short circuit. |
≥attempt to recharge alkaline or manganese |
STEP 3
≥You cannot use DTS Digital Surround decoders not suited to DVD.
Change “PCM OUTPUT”, “DOLBY DIGITAL” and “DTS” (➜ 17, “AUDIO” menu).
∫Connect the AC mains lead last
AC mains lead
To household mains socket
∫Connect to the ground terminal
Ground the unit by connecting a copper wire to the screw on the back of the unit and the ground terminal to prevent static electricity buildup caused by the karaoke microphone.
To the ground terminal
SIGNAL EARTH
batteries. |
≥use batteries if the covering has been peeled off. |
Mishandling of batteries can cause electrolyte leakage which can damage items the fluid contacts and may cause a fire.
Remove if the remote control is not going to be used for a long period of time. Store in a cool, dark place.
∫Use
Aim at the remote control sensor (➜ 8), avoiding obstacles, at a maximum range of 7 m directly in front of the unit.
STEP 3 Quick setup
Preparation
Turn on the television and select the appropriate video input on the television.
1Press [Í].
2Press [SETUP].
QUICK SETUP screen appears.
3Follow the
≥Press [RETURN] to return to previous screen.
4Press [ENTER] to finish setting.
5Press [SETUP] to exit the setup menu.
≥To change these settings later, select “QUICK SETUP” (➜ 17, “OTHERS” menu).
RQTC0126 STEP 1 Connection/STEP 2 The remote control
7
7
