8
RQT8248

Preparations

Preparations

1 Attaching the battery (When the unit is off)

An optional battery pack (CGR-H713) is also available. The procedure for attaching and
detaching is the same.
Detaching
≥
Turn the unit off before detaching the battery pack.
When not using for long periods of
time
≥
Remove the battery pack (➜ left).
(Even when the unit is turned off, there is a
small amount of voltage running through the
unit, and this may result in a malfunction.)
≥
Recharge the battery for re-use.
FOR THE UNITED KINGDOM ONLY
READ THE CAUTION FOR THE AC MAINS LEAD ON PAGE 2 BEFORE CONNECTION.
Clicks into place
Check to make sure it is securely fastened.
Bottom side of this unit
Battery pack
RELEASE
DETACH ATTACH
Press and hold
12
DC IN
DC IN 12 V
%
3
To
household
mains socket
AC adaptor
(included)
AC mains lead (included)
≥
You can also use this unit without charging while
connecting the AC adaptor and the AC mains lead.
≥
You can also use this unit without charging while
connecting Car DC Adaptor (
➜
page19,
Connecting the
included Car DC Adaptor
).
To conserve power
This unit consumes 0.3 W of power even when turned off. When
the unit is not going to be used for a long time, disconnect the
AC mains lead from the household mains socket.
The unit is in the standby condition (the [Í] indicator
lights) when the AC mains lead is connected. The
primary circuit is always “live” as long as the AC adaptor
is connected to an electrical outlet.

2 Recharging the battery (When the unit is off)

[
Í
] goes out ➜ lights
[CHG] lights ➜ goes out
Recharging time :
Approx. 4 hours
(CGR-H701, included)
Approx. 10 hours
(CGR-H713
, optional
)
When finished, disconnect the AC
adaptor and the AC mains lead.
Í
CHG
Started Finished