Denon DVD-A11 manual When Digital OUT is selected, Normal Factory default, Pcm, 2nd

ENGLISH

3

BWhen “DELAY TIME” is selected:

With 5.1-channel surround sound, ideally the distance between the listening position and all the speakers aside from the subwoofer should be the same. The delay time setting can be used to make the sound from the different speakers reach the listening position at the same time.

Use the • and ª cursor buttons to select the setting item, then press the ENTER button.

•When “DISTANCE” is selected:

METERS (when the 0 cursor button is pressed): The unit of distance is set to meters (“m”). FEET (when the 1 cursor button is pressed): The unit of distance is set to feet (“ft”).

•When “FRONT Lch”, “FRONT Rch”, “CENTER”, “SURROUND Lch”, ”SURROUND Rch”, “SUBWOOFER” is selected:

Use the 0 and 1 cursor buttons to set the distance from the listening position to the different speakers.

✽The distance can be set within the range of 0 to 18 meters (60 feet).

✽The maximum difference in speaker distance for which adjustment is possible is 7.5 meters (25 feet).

•When “DEFAULT” is selected:

When “DEFAULT” is selected and the ENTER button is pressed, all the items are restored to their factory default settings.

✽When digital connections are made with an AV amplifier, make the speaker settings on the AV amplifier.

For DVD audio discs, the disc’s settings are given priority, so the sound may not be produced as set with the above speaker mode setting.

✽Press the RETURN button to return to the “SPEAKER SETUP” menu.

ENTER

Remote control unit Remote control unit

S P E A K E R S E T U P
		DE L AY T I ME
	D I STANC E			METERS
	F RONT	L c h		3.6 m
	F RONT	R c h		3.6 m
	CENT ER			3.6 m
	SURROUND		L c h	3.0 m
	SURROUND		R c h	3.0 m
	SUBWOOF ER			3.6 m
	DE F AUL T			ON
SE L EC T :	DE C I S I ON : ENT E R			BUT TON

ENTER

Remote control unit

S P E A K E R S E T U P
		DE L AY T I ME
	D I STANC E			METERS
	F RONT	L c h		3.6 m
	F RONT	R c h		3.6 m
	CENT ER			3.6 m
	SURROUND		L c h	3.0 m
	SURROUND		R c h	3.0 m
	SUBWOOF ER			3.6 m
	DE F AUL T			ON
SE L EC T :	DE C I S I ON : ENT E R			BUT TON

S P E A K E R S E T U P
		DE L AY T I ME
	D I STANC E			METERS
	F RONT	L c h		3.6 m
	F RONT	R c h		3.6 m
	CENT ER			3.6 m
	SURROUND		L c h	3.0 m
	SURROUND		R c h	3.0 m
	SUBWOOF ER			3.6 m
	DE F AUL T			ON
SE L EC T :	DE C I S I ON : ENT E R			BUT TON

3

wWhen “DIGITAL OUT” is selected:

NORMAL (Factory default)

When playing DVDs recorded in Dolby Digital or DTS, bitstream signals are output from the digital audio output terminals. When playing DVDs recorded in linear PCM or packed PCM, linear PCM signals are output.

Select “NORMAL” when making digital connections to an AV amplifier with built-in Dolby Digital and DTS decoder.

PCM

When playing Dolby Digital/DTS bitstream signals or DVDs recorded in linear PCM or packed PCM, the signals are converted into 48 kHz/16-bit PCM (2-channel) signals and output from the digital outputs. When playing DVDs recorded in PCM, linear PCM signals are output.

eWhen “LPCM (44.1 kHz/ 48 kHz)” is selected:

OFF (Factory default)

When playing linear PCM or packed PCM DVDs that are not copyright-protected, for 2-channel PCM audio signals up to 96 kHz, linear PCM signals are output as such without being converted from the digital outputs. (176.2 kHz and 192 kHz signals are converted to 88.2 kHz and 96 kHz, respectively.)

For DVDs containing multi-channel PCM signals, the digital signals are down-mixed for output into two channels, front left and right. (Only the front left and right channels are output for sources for which down-mixing is prohibited.)

When playing copyright-protected linear PCM or packed PCM DVDs, in consideration of copyrights, no digital signals are output for sources exceeding 48 kHz/16 bits. When playing such sources, either set to “ON” or make analog connections. (See page 9.)

ON

Linear PCM and packed PCM signals are converted to 44.1 kHz or 48 kHz and output. (The PCM digital audio output signals are converted to 48 kHz or less in consideration of copyrights.) When making digital connections to an AV amplifier that is not compatible with 96 kHz/88.2 kHz signals, set to “ON”.

rWhen “DENON LINK” is selected:

OFF (Factory default)

Digital audio signals are not output from the DENON LINK terminal.

2nd

Set this when the amplifier to be connected is DENON LINK 2nd.

			ENTER
Remote control unit			Remote control unit
AUD I O	SE TUP
AUD I O CHANNE L
D I G I TAL		OUT	NO RMA L
L PCM (4 4		. 1 kH z / 4 8 kH z )	PCM
DENON L I NK
I E E E 1 3 9		4
SOURCE D I RE CT
BASS	ENHANCE R
E X I T	SE TUP
SE L EC T :		DE C I S I ON : ENT E R BUT TON

AUD I O	SE TUP
AUD I O CHANNE L
D I G I TAL		OUT
L PCM (4 4		. 1 kH z / 4 8 kH z )	OF F
DENON L I NK			ON
I E E E 1 3 9		4
SOURCE D I RE CT
BASS	ENHANCE R
E X I T	SE TUP
SE L EC T :		DE C I S I ON : ENT E R	BUT TON

AUD I O	SE TUP
AUD I O CHANNE L
D I G I TAL		OUT
L PCM (4 4		. 1 kH z / 4 8 kH z )
DENON L I NK			OF F
I E E E 1 3 9		4	2nd
SOURCE D I RE CT
BASS	ENHANCE R
E X I T	SE TUP
SE L EC T :		DE C I S I ON : ENT E R	BUT TON

20