6REMOTE CONTROL UNIT
2The
ENGLISH
(3) Names and Functions of Remote Control Unit Buttons
2Button not explained here function in the same way as the corresponding buttons on the main unit.
POWER ON/POWER OFF buttons
NTSC/PAL button
Use this to switch the set’s
(1) Inserting Batteries
qRemove the remote control unit’s rear cover.
wPlace two R6P/AA batteries in the battery compartment in the direction indicated by the marks.
eClose the rear cover.
Cautions On Batteries
•Use R6P/AA batteries in this remote control unit.
•Replace the batteries with new ones approximately once a year, though this depends on the frequency with which the remote control unit is used.
•If the remote control unit does not operate from close to the main unit, replace the batteries with new ones, even if less than a year has passed.
•The included battery is only for verifying operation. Replace it with a new battery as soon as possible.
•When inserting the batteries, be careful to do so in the proper direction, following the < and > marks in the remote control unit’s battery compartment.
•To prevent damage or battery fluid leakage:
• Do not use a new battery with an old one.
• Do not use two different types of batteries.
• Do not
•Remove the batteries when not planning to use the remote control unit for a long period of time.
•If the batteries should leak, carefully wipe off the fluid from the inside of the battery compartment, then insert new batteries.
Press this to switch the power between on and standby.
Number buttons
Use these to input numbers. Use the +10 button to input numbers of 10 or over.
Example: To input 25
+10 
+10 
5
TOP MENU button
The top menu stored on the disc is displayed.
Cursor buttons/ENTER button
Use the •and ªcursor buttons to select in the vertical direction. Use the 0 and 1 cursor buttons to select in the horizontal direction.
Press the ENTER button to select the item selected with the cursor buttons.
MENU button
The DVD menu stored on the disc is displayed.
STOP button (2)
SKIP buttons
ANGLE button
Press this to switch the angle.
SUBTITLE button
Press this to switch the DVD’s subtitle language.
POWER | OPEN / |
NTSC / PAL CLOSE |
ON OFF
PROG / DIR
1 2 3
CLEAR
4 5 6
SRS.TS
7 8 9
CALL RETURN
0 +10
TOP MENU | DISPLAY |
T. MENU | DISP. |
ENTER
PLAY
MENU
STILL /
STOP PAUSE
SKIP | SLOW / SEARCH |
ANGLE SUBTITLE AUDIO SEARCH MODE
REPEAT | RANDOM | MARKER | |
SETUP | DIMMER | PIC.ADJ |
|
video output format (NTSC/PAL).
OPEN/CLOSE button
PROGRAM/DIRECT button (PROG/DIR)
Press this to switch between the normal play, programmed play.
CLEAR button
Press this to clear numbers that you have input.
SRS.TS button
Sets the virtual surround sound. (Functions when playing DVD- videos or VCDs only. (See page 26.))
RETURN button
Press this to return to the previous menu screen.
DISPLAY button
Press this to display the ON-
SCREEN.
CALL button
Press this to check the program contents.
PLAY button (1)
STILL/PAUSE button (3)
SLOW/SEARCH buttons
SEARCH MODE button
(2) Using the Remote Control Unit
A-B repeat button (A-B)
ZOOM | PAGE |
Press this to change the search mode to search for groups or titles, tracks or chapters when
Approx. 7 meters
30°
30° 
•When operating the remote control unit, point it at the remote control sensor as shown on the diagram.
•The remote control unit can be used from a direct distance of approximately 7 meters. This distance will be shorter, however, if there are obstacles in the way or if the remote control unit is not pointed directly at the remote control sensor.
•The remote control unit can be operated at a horizontal angle of up to 30° with respect to the remote control sensor.
Use this to repeat sections between two specific points.
REPEAT button
Press this to play tracks repeatedly.
SETUP button
Press this to display the default setting screen.
DIMMER button
Use this to adjust the brightness of the main unit’s display. Can be switched in 4 steps, from OFF to always on.
selecting sections of discs directly using the number buttons.
AUDIO button
For DVDs, press this to switch the audio language. For video CDs, press this to switch the channel between “LR”, “L” and “R”.
RANDOM button
Press this to play the tracks on the video or music CD in random order.
MARKER button
NOTES:
•It may be difficult to operate the remote control unit if the remote control sensor is exposed to direct sunlight or strong artificial light.
•Do not press buttons on the main unit and on the remote control unit at the same time. Doing so will result in malfunction.
ZOOM button
Press this to enlarge the image.
Picture adjust button (PIC.ADJ)
Press this to adjust the picture quality to suit your tastes.
Press this to mark places you want to see again.
PAGE -/PAGE + buttons
Use these to selected the desired still picture on DVD audio discs containing browseable still pictures.
13
