Denon DVD-A11 Connecting a basic 5.1-channel surround system, Connecting to a Stereo Component

(5) Connecting a basic 5.1-channel surround system

Analog 5.1-channel audio signals can be output from the DVD-A11.

The multichannel audio signals recorded in packed PCM and the multichannel Super audio CDs can be played when an AV amplifier equipped with analog 5.1-channel audio inputs is connected.

To power outlet

DVD-A11

ENGLISH

(6)Connecting to a Digital Recorder (MD Recorder, DAT Deck, etc.)

✽Set the “AUDIO SETUP” default setting as shown below. (See page 20.)

•“DIGITAL OUT” → “PCM”

“LPCM (44.1 kHz / 48 kHz)” → “ON”

Playing DVDs with incorrect settings may result noise that could damage your ears or the speakers.

DVD-A11

Center speaker

B

Digital audio input connector (OPTICAL)

Optical fiber cable (commercially available)

(or)

75 Ω/ohms pin-plug cable (commercially available)

Digital audio input connector (COAXIAL)

Front speaker (left)		SUBWOOFER	Front speaker (right)
CENTER	SURROUND		FRONT
			Subwoofer

NOTE:

•Digital audio signals cannot be output when playing Super Audio CDs. Use analog connections to record Super Audio CDs.

Surround speaker (left) Surround speaker (right)

AV amplifier with 5.1-channel input terminals

NOTES:

•For multi-channel connections, set “AUDIO CHANNEL” under “AUDIO SETUP” at “SETUP” to “MULTI CHANNEL” and make the “SPEAKER CONFIGURATION”, “CHANNEL LEVEL” and “DELAY TIME” settings. (See pages 19, 20.)

•With the DVD-A11, we recommend turning the digital output off and only outputting analog signals in order to keep interference from the digital output circuitry to the minimum and allow you to enjoy high bit, high sampling frequency, high quality multi-channel sound.

(7) Connecting to a Stereo Component

DVD-A11

Stereo component

NOTE:

•When connecting to a 2-channel audio stereo device, set “AUDIO CHANNEL” under “AUDIO SETUP” at “SETUP” to “2 CHANNEL” (see page 19). For multi-channel sources, the signals are down-mixed into two channels (analog).

(Only the front left and right channels are output for sources for which down-mixing is prohibited.)

9