ENGLISH
3
tWhen “IEEE1394” is selected:
OFF (Factory default)
Digital audio signals are not output from the IEEE1394 terminal.
ON
B When “ON” is selected:
This will lead to the “AUTO PLAY”, and “AUDIO FORMAT” setting screens. Select the item to be set using the (•, ª) cursor buttons and press the ENTER button.
B Auto Play
Set this when automatically playing this unit from another device, under circumstances in which this unit is used in conjunction with a DENON device that supports IEEE1394.
B Audio Format
Set this format of audio signals from IEEE1394 connector.
B Auto Play Setting Method
OFF (Factory default)
Set this when you do not wish to control the operation of this unit from another device.
ON
Set this when you wish to control the operation of this unit from another device.
BAudio Format Setting Method
FORMAT 1 (Factory default)
Set this when you conjunction with a DENON device.
FORMAT 2
This is a mode for future system expansion. IEEE1394 indicator
When “IEEE1394” set to “ON”, this indicator lights as bellow.
flashing . . . . . . . . self check of IEEE1394 connections.
light . . . . . . . . . . . IEEE1394 connection is OK.
ENTER
Remote control unit | Remote control unit |
AUD I O | SE TUP |
| |
AUD I O CHANNE L |
| ||
D I G I TAL | OUT |
| |
L PCM (4 4 | . 1 kH z / 4 8 kH z ) |
| |
DENON L I NK |
| ||
I E E E 1 3 9 | 4 | OF F | |
SOURCE D I RE CT | ON | ||
BASS | ENHANCE R |
| |
E X I T | SE TUP |
| |
SE L EC T : | DE C I S I ON : ENT E R | BUT TON | |
I E E E 1 3 9 4 SE T UP
I E E E 1 3 9 4 S E TUP
AUTO PL AY | OFF |
AUD I O F ORMAT | F ORMAT 1 |
SE L EC T : | DE C I S I ON : ENT E R BUT TON |
3
yWhen “SOURCE DIRECT ” is selected:
OFF (Factory default)
Please set to OFF when performing speaker settings or setting the delay time and playing back.
ON
Set to ON when playing back without performing the processing of speaker settings. Performing this setting will result in the setting of the DTS recommended all- channel, full bandwidth playback. (Note that the volume of the sub woofer will increase by 5 dB, and there will be an increase of 15 dB with a Super Audio CD.) This is also set when playing back a
uWhen “BASS ENHANCER” is selected:
OFF (Factory default)
No sound is produced from the subwoofer.
ON
Sound is produced from the subwoofer.
In the case, set the subwoofer to “YES” at the speaker
settings.
✽ This works only with analog audio output.
ENTER
Remote control unit | Remote control unit |
AUD I O | SE TUP |
| |
AUD I O CHANNE L |
| ||
D I G I TAL | OUT |
| |
L PCM (4 4 | . 1 kH z / 4 8 kH z ) |
| |
DENON L I NK |
| ||
I E E E 1 3 9 | 4 |
| |
SOURCE D I RE CT | OF F | ||
BASS | ENHANCE R | ON | |
E X I T | SE TUP |
| |
SE L EC T : | DE C I S I ON : ENT E R | BUT TON | |
AUD I O | SE TUP |
| |
AUD I O CHANNE L |
| ||
D I G I TAL | OUT |
| |
L PCM (4 4 | . 1 kH z / 4 8 kH z ) |
| |
DENON L I NK |
| ||
I E E E 1 3 9 | 4 |
| |
SOURCE D I RE CT |
| ||
BASS | ENHANCE R | OF F | |
|
|
| ON |
E X I T | SE TUP |
| |
SE L EC T : | DE C I S I ON : ENT E R | BUT TON | |
IEEE 1394 | slow flashing. . . . IEEE1394 connection is NG. |
| |
| (Loop connection) confirm the |
| connection. |
| fast flashing . . . . IEEE1394 connection is NG. |
| confirm the connection. |
✽To exit the setup mode
Use the ª cursor button to select “EXIT SETUP”, then press the ENTER button. It is also possible to quit by pressing the SETUP button on the remote control unit.
21
