Panasonic DVD-LX110 Attaching the unit to the bracket, Diagram of attached bracket

3Attaching the unit to the bracket.

While holding the unit with both hands, line up the unit just below the protruding sections on the bracket. Press the unit down about 4 to 5 mm (5/32Sto 3/16S) so that the protrusions on the bracket fit into the holes on the bottom of the unit.

pPlease check the following points before use. –The bracket is securely fastened to the unit.

–The unit is not loose and cannot be lifted upwards.

Line up the protruding sections here.

When correctly	click!
attached,
you will hear a
locking sound.	Enjoying in a car

Diagram of attached bracket	You can use the monitor in
	the open position as shown in
	the illustration to the right.
	The angle of the monitor can
	be adjusted up to about 30°.

30

pThe angle of the monitor may shift while driving due to vibration, etc.

pDepending on the type of headrest, you

may not be able to attach the bracket.

23 cm (9 1/16S) or less

In the event of an accident etc., the unit could become loose and cause injury.

Releasing the unit from the bracket

Release button

Press the release buttons (left and right) in towards the center of the bracket.

Lift the unit up to release it.

pDo not press the release buttons any time other than when detaching the unit from the bracket.

RQT8231

31

31