Progressive video

Unit displays

There is ghosting when progressive output is on.

Pictures not in progressive output.

Closed captions not displayed.

This problem is caused by the editing method or material used on DVD-Video, but should be corrected if you use interlace output. Change “Video Output Mode” in Picture Menu to “480i”. (15)

If the unit is connected to the television through VIDEO OUT or S VIDEO OUT, output will be interlace.

When progressive output is on, closed captions will not be displayed.

“noPLAy”

You inserted a disc the unit cannot play; insert one it can. (5)

 

You inserted a blank disc.

 

You inserted a disc that has not been finalized. (5)

“U11”

The disc may be dirty. (21)

“H∑∑

Trouble may have occurred. The number following “H”

∑∑stands for a depends on the status of the unit. Turn the unit off and then

number.

back to ON. Alternatively, turn the unit off, disconnect the AC

 

power supply cord, and then reconnect it.

 

If the service numbers fail to clear, note the service number

 

and contact a qualified service person.

Sound incorrect

Sound distorted.

Piercing noise comes from the speakers.

Effects do not work.

No sound

Select “Off” in “Advanced Surround”. (10)

Select “On” in “Attenuator” in Audio Menu if it causes distortion with AUDIO OUT connections. (15)

Noise may occur when playing WMA files.

If you have connected a digital amplifier which does not include decoder, be sure to select “PCM” in “Dolby Digital” or “DTS Digital Surround” in “Audio” tab. (17)

None of the audio effects work when the unit is outputting bitstream signals from the COAXIAL terminal. (7)

Some audio effects do not work or have less effect with some discs.

Advanced Surround and Sound Enhancement do not work if you have changed the play speed.

There may be a pause in sound when you change the play speed.

“nodISC”

You haven’t inserted a disc: Insert one.

 

 

 

You haven’t inserted the disc correctly: Insert it correctly. (8)

guide

 

 

 

Television displays

 

 

 

 

/

 

The operation is prohibited by the unit or disc.

“Cannot display

 

You are trying to play incompatible groups or content. (5)

Troubleshooting

group xx, content

 

 

xx”

 

 

 

 

 

“Check the disc”

 

This disc may be dirty. (21)

“This disc may

 

You can only play DVD-Video if their region number is “1”,

not be played in

 

“ALL” or multiple region number including “1”. (5)

your region”

 

 

 

 

 

No on-screen

 

Select “On” in “On-Screen Messages” in “Display” tab. (17)

display.

 

 

 

 

 

 

 

 

 

Recording

Cannot record to digital recording equipment.

(Incorrect sound recorded.)

You cannot record WMA/MP3.

You cannot record DVDs that have protection preventing digital recording.

You cannot record DVDs if the recording equipment cannot handle signals with a sampling frequency of 48 kHz.

Make the following settings:

– Advanced Surround:

Off (10)

– PCM Digital Output:

Up to 48 kHz (17)

– Dolby Digital/DTS Digital Surround:

PCM (17)

RQT8218

19

Page 19
Image 19
Panasonic RQT8218-P, DVD-S26 Guide, Progressive video Unit displays, Sound incorrect, Recording, Television displays