Panasonic DVD-S52 Basic play 1Power on 2Open the disc tray, 3Load the disc, 4Start play, Skip

Basic play

1Power ON. 2Open the disc tray.

Stop Pause

3Load the disc. Remote control sensor 4Start play.

≥Load double-sided discs so the label for the side you want to play is facing up.

≥DVD-RAM: Remove discs from their cartridges before use.

Skip

≥[DVD-VR]Can also skip to the markers.

Stop

The position is memorized when “!” flashes on the display.

≥Press [1] (PLAY) to resume. (Resume play)

≥Press [∫] to clear the position.

≥Even after the unit is turned off, the position is memorized (Normal playback only).

Repeat play

≥Select “Repeat” (➜ page 12, Repeat play) or “A-B Repeat” (➜ page 17, Play Menu).

Search (during play)

Slow-motion(during pause)

≥Up to 5 steps

≥Press [1] (PLAY) to restart play.

≥[VCD] Slow-motion: forward direction only

≥[MPEG4] [DivX] Slow-motion: Does not work.

Pause

≥Press [1] (PLAY) to restart play.

Basic play

Standby/on switch (Í/I)

Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power.

Standby/on indicator (Í)

When the unit is connected to the AC mains supply, this indicator lights up in standby mode and goes out when the unit is turned on.

≥To play [MP3], [JPEG], [MPEG4] or [DivX] contents on DVD-RAM that contain both [DVD-VR]and another format (e.g. [JPEG]), select “Play as Data Disc” (➜ Page 19, Other Menu).

≥“D.MIX” on the display indicates that a soundtrack with three or more channels can be down-mixed to two channels (➜ Page 27, Glossary).

≥Discs continue to rotate while menus are displayed. Press [∫] when you finish to preserve the unit’s motor and your television screen.

≥Total title number may not be displayed properly on iR/iRW.

If you are experiencing problems, refer to troubleshooting guide (➜ page 23–25).

RQT8519

9