Panasonic DVD-S52 specifications Using On-Screen Menus, Audio Menu

Using On-Screen Menus

Menus

Video Output Mode

With HDMI connection (When “Video Output” is set to “On”) (➜ page 21, “HDMI” tab)

Video recordings will be converted to, and output as, high definition video.The picture quality will vary depending on the connected equipment. Choose the picture quality to your preference.

480p/576p (progressive)§

720p (progressive)

1080i (interlace)

≥“¢” will be displayed next to those video outputs possible with the connected equipment. Selecting an item without “¢” can result in the picture being distorted.

Should the picture be distorted, press and hold [CANCEL] until the picture is displayed correctly.

The setting will return to “480p” or “576p”.

≥Output from the COMPONENT VIDEO OUT terminal will be “480p” or “576p”.

With HDMI connection (When “Video Output” is set to “Off”) (➜ page 21, “HDMI” tab) or other connections

480i/576i (interlace)§ 480p/576p (progressive)§

When you select “480p” or “576p” and a confirmation screen appears, select “Yes” only if connecting to a progressive output compatible television.

When you select “Auto” the constructing method of the DivX contents is automatically distinguished and output. If the picture is

Source Select distorted, select “I (Interlace)” or “P (Progressive)” depending on

[DivX]	which constructing method was used when the contents were
	recorded to disc.
	Auto	I (Interlace)	P (Progressive)

With HDMI connection (When “Video Output” is set to “On”) HD Picture (➜ page 21, “HDMI” tab)

Enhancer Makes the quality of HDMI video output(720p,1080i) sharp. Off, 1(weakest) to 3 (strongest)

With HDMI connection (When “Video Output” is set to “On”) (➜ page 21, “HDMI” tab)

The picture quality will vary depending on the connected

HDMI Colour	equipment. Choose the picture quality to your preference.
Space	Should one of the items below not be possible with the connected
	equipment it will not be displayed.
	RGB	YCbCr (4:4:4)	YCbCr (4:2:2)

≥“RGB Range” (➜ page 21, “HDMI” tab) is available when “RGB” is selected.

∫Audio Menu

Night Sound	(➜ page 11)
Mode
H.Bass	(➜ page 11)

Using On-Screen

RQT8519

18

If you have chosen “480p”, “576p”, “720p” or “1080i” (➜ above), select the method of conversion to suit the type of material.

≥When the tray is opened, the setting will return to Auto or Auto1.

	When playing PAL discs, MPEG4 or DivX video contents
	Auto:	Automatically detects the film and video content, and
		appropriately converts it.
	Video: Select when using Auto, and the content is distorted.
Transfer	Cinema: Select this if the edges of the film content
		appear jagged or rough when Auto is
Mode		selected.
		However, if the video content is distorted

as shown in the illustration to the right, then select Auto.

When playing NTSC discs

Auto1 (normal): Automatically detects the film and video content, and appropriately converts it.

Auto2: In addition to Auto1, automatically detects film contents with different frame rates and appropriately converts it.

Video: Select when using Auto1 and Auto2, and the content is distorted.

Advanced	(➜ page 12)
Surround
	To make the dialogue in movies easier to hear
Dialogue	[DVD-V](Dolby Digital, DTS, MPEG [Except\Asia], 3-channel or over,
	with the dialogue recorded in the center channel)
Enhancer	[DivX] (Dolby Digital, 3-channel or over, with the dialogue recorded in
	the center channel)
	On ,------. Off

Multi Re-master (➜ page 12)

§480i, 480p : When playing NTSC discs

576i, 576p : When playing PAL discs