Recording

Cannot record to

You cannot record WMA/MP3.

 

digital recording

You cannot record DVDs that have protection preventing

equipment.

digital recording.

 

You cannot record DVDs if the recording equipment cannot

(Incorrect sound

handle signals with a sampling frequency of 48 kHz.

recorded.)

Make the following settings:

Off (12)

 

– Advanced Surround:

 

– PCM Digital Output:

Up to 48 kHz (21)

 

– Dolby Digital/DTS Digital Surround/MPEG§1: PCM (21)

Unit displays

“noPLAy”

You inserted a disc the unit cannot play; insert one it can. (4)

 

You inserted a blank disc.

 

You inserted a disc that has not been finalized. (4)

“U11”

The disc may be dirty. (right)

 

You inserted a disc that has not been finalized. (4)

 

 

“H∑∑”or“F7∑∑

Trouble may have occurred. The number following “H” and

(∑∑ stands for a

“F7” depends on the status of the unit. Turn the unit off and

number.)

then back to ON. Alternatively, turn the unit off, disconnect

the AC mains lead, and then reconnect it.

 

 

If the service numbers fail to clear, note the service number

 

and contact a qualified service person.

“nodISC”

You haven’t inserted a disc: Insert one.

 

You haven’t inserted the disc correctly: Insert it correctly. (9)

 

 

“U70-1”

The connected equipment is not HDMI compatible.

“U70-

The HDMI connection acts unusually.

(stands for a

– The connected equipment is not HDMI compatible.

number.)

– The HDMI cable is too long.

The actual number

– The HDMI cable is damaged.

following “U70-” will

 

depend on the state

 

of this unit.

 

 

 

Television displays

“Cannot play audio”

Audio has not been recorded, or recorded in a format this unit

 

“No audio”

cannot playback. Only video playback is possible. (5)

 

“Check the disc”

This disc may be dirty. (below)

 

 

 

 

“Due to copyright

Should you connect equipment that does not support CPPM

 

protection, audio

(27), the audio from the CPPM copy protected DVD-Audio

 

cannot be output

cannot be output from HDMI AV OUT terminal. Connect the

 

from HDMI”

audio cable of the Audio/Video cable (L, R) to a HDMI

guide/Maintenance

 

compatible AUDIO IN terminal. (7)

 

 

While “HDMI

If you select an item without an “¢” in the “Video Output Mode”

 

Status” displayed,

in Picture Menu, it will not be underlined. (18)

 

no items are

 

 

underlined

 

 

 

 

 

“This disc may not

You can only play DVD-Video if their region number is the

 

be played in your

same or includes the same region number as the unit or if the

 

region”

DVD-Video is marked “ALL”. Confirm the region number for

 

 

the unit on the rear panel. (Cover)

 

No on-screen display.

Select “On” in “On-Screen Messages” in “Display” tab. (21)

 

 

 

 

“Authorization Error”

You are trying to play the DivX VOD content that was

Troubleshooting

 

purchased with a different registration code. You cannot play

 

the content on this unit. (16)

 

“Rented Movie

The DivX VOD content has zero remaining plays. You cannot

 

ExpiredӤ2

play it. (16)

 

“Rental Expired”§3

 

 

§1MPEG: [Except\Asia]

 

 

§2 [Except\Asia]

 

 

§3 \Asia]

 

 

Maintenance

Clean this unit with a soft, dry cloth

Never use alcohol, paint thinner or benzine to clean this unit.

Before using chemically treated cloth, read the instructions that came with the cloth

carefully.

Cleaning of the lens is generally not necessary although this depends on the

/

“Cannot play group xx, content xx” “Cannot display group xx, content xx”

Group xx, content xx is protected

The operation is prohibited by the unit or disc.

You are trying to play incompatible group or content. (5)

You are trying to play protected group or content. You cannot play it.

operating environment.

Do not use commercially available lens cleaners as they may cause malfunction.

Clean discs

Wipe with a damp cloth and then wipe dry.

RQT8519

 

25

Page 25
Image 25
Panasonic DVD-S52 specifications Maintenance, Clean this unit with a soft, dry cloth, Clean discs